Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Frequency Display Box fixed location

Ken K7YR
Ken K7YR Member ✭✭
edited January 2020 in New Ideas
Location of the frequency display boxes are apparently fixed. [To the left of the frequency selected. I note that in setting up any bandwidth on lower sideband, the display box covers up the top of the bandpass filter, obscuring the top of the scale. In addition, when selection of two frequencies close to one another, as necessary, when as NCS of a traffic net and also keeping track of off net frequency traffic , the two displays over lap and obscure each other. In the future, would there be the possibility of selecting either side of operating frequency to place the display box? Ken K7YR
3
Up Down
3 votes

Completed · Last Updated

Comments

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    Wait until the next version of SmartSDR is released. It has a new feature that will prevent the slice control panels that are in close proximity to one another from over lapping
  • Ken K7YR
    Ken K7YR Member ✭✭
    edited March 2018
    Hi Tim, Roger, Lots and Lots of features to develop. Going beck to the basics after owing the 5000A and 3000 can be frustrating, however using the past as a reference and applying a little imagination, the future is surly promising........> Ken K7YR
  • Bill - K7UOP
    Bill - K7UOP Member
    edited January 2020
    I like the fact that in the latest version of SmartSDR that panels no longer overlap. Thanks guys. But I agree, when in LSB it would be nice if the panel was displayed on the opposite side so as not to obscure the signal's spectrum.
  • DonS
    DonS Member ✭✭✭
    edited August 2013
    i couldn't agree more with moving the panel to the right side when in LSB.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories