Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Aurora Arrived

2»

Comments

  • Arnold Goldman
    Arnold Goldman Member ✭✭

    tnx for comments; don't mind paying for the early access but the knob is still getting stuck at around 6-7 o'clock position it does NOT feel the same as the 8600M just frustrating that ALL THREE of my radios had problems; 6600M front speaker was dead 5 years ago; 8600M had terrible fan noise and now this; such is life bigger problems to deal with; anyway tnx for comments; do i have the power set up correctly it's @100% and only getting 100 watts out; tnx for info

  • Arnold Goldman
    Arnold Goldman Member ✭✭

    **** question is FRStack third party software; not familiar with it tnx

  • Trucker
    Trucker Member ✭✭✭✭
    edited 12:30AM

    Yes ,FRStack is a 3rd party application. It has a lot of useful features and once you get used to it,, you will wonder how you ever got along without it.

    FRStack - My ASP.NET Application https://share.google/ugt0DZmsw6G2n7rph

  • Trucker
    Trucker Member ✭✭✭✭

    Maybe you can pull the knob slightly towards you and take pressure off of whatever is causing it to bind up. But, to be on the safe side, I would still suggest opening a Help Desk ticket.

    James

    WD5GWY

  • Arnold Goldman
    Arnold Goldman Member ✭✭

    did that and was told to take the rubber ring off first then remove the VFO knob and look for a loose piece of tape holding onto a counterweight; great start for a new radio HIHI

  • Trucker
    Trucker Member ✭✭✭✭

    I remember reading something about removing the rubber ring now that you mention it. I hope you didn't damage anything if you tried my suggestion first!

    I hope the correct procedure fixed the problem for you.

    James

    WD5GWY

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.