Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

It the Front LED always orange when using the transverter?

Tom C
Tom C Member
I just noticed that when transmitting digital using the transverter on 630 meters, the front LED is Orange but when using CW it is Red. No problem, just wondering if that is correct?
Thanks
Tom
N9RU

Best Answers

  • KD0RC
    KD0RC Member, Super Elmer Moderator
    edited January 4 Answer ✓

    Hi Tom, that sounds right. From the FLEX-6400 / FLEX-6600 HARDWARE REFERENCE manual:

    I never noticed my 6400 showing orange when transmitting on the transverter, so I tried it with the RF power turned down as well as with the transverter turned down to -10 dBm. It always shows red for me. Which FLex do you have that shows orange?

    EDIT: Well, my 6400 DOES in fact show orange(ish) as opposed to bright red. I have a bit of male pattern red/green colorblindness, so I don't see subtle color differences very well. I never noticed the difference in color until tonight. I will say that I am wearing my grey shirt and my wife will correct me - it's blue!!

  • Neil D Friedman N3DF
    Neil D Friedman N3DF Member ✭✭✭✭
    edited January 4 Answer ✓

    Yes. List of colors in Sec. 7.5 of the 6400M/6600M manual. I assume there is a similar section in the 6400/6600 reference manual.

  • LZ2BE
    LZ2BE Member ✭✭
    Answer ✓

    My 6600 LED color is orange when TX on XVTA port on all modes except CW where is red.

Answers

  • Neil D Friedman N3DF
    Neil D Friedman N3DF Member ✭✭✭✭


  • Tom C
    Tom C Member
    edited January 4
    It is the 6400, orange seems correct for the transverter in DIGU but nothing changed except mode from DIGU to CW and the led goes red, still transverter on 630.
    Just wondering.
    Thanks everyone.
  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    The LED colour is not mode dependent at all. If you are seeing something different, please open a support ticket so we can track it.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.