Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Interfacing F 6700 with DX Engineering RTR-2

Mr Radio
Mr Radio Member ✭✭✭
in Peripherals & Station Integration

I consider interfacing both units. Is there someone who has done it already?

In RTR-2 manual there are sevaral remarks made about a proper PTT connection.

All comments will be appreciated.


Tom

Answers

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    It has been a long time since I used one, but you just need to connect the RCA PTT to any of the PTT ports on the back of the radio and then go into TX settings and turn that TX port (1-3) on for the bands that you may use the RTR-2 on.

  • Mr Radio
    Mr Radio Member ✭✭✭

    TNX, OM Mike,

    Your response answers my question.


    Tom

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    The other thought if you are just using a single RX antenna, you could just use the RX antenna port. On a 6300 you can use the XVTR port.

    Unless you are doing a few more things.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories