Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Distortion of recorded audio

ka9ees
ka9ees Fithian IL USAMember ✭✭✭

I bought a new mic this week. This has nothing to do with that, but it got a friend of mine and I doing some over the air recordings. We're both running the latest firmware (3.2). It records and plays back. When playing back locally it sounds just fine. The station listening to it says it is nearly unreadable it is so distorted.

Since I am using a dynamic mic. I have mic gain at 47. Processor is set to normal. As I am driving an amp power out is 60W.

I sound normal with the mic. When transmitted back to me it sounds pretty rough from his rig. We're both running 6400Ms. His power is around 500W from a KPA500. Mine is about 1KW from an Heathkit SB221.

I don't recall having this problem prior to the firmware update. I don't know if it's an unknown bug. Or if both our rigs are broken. 😉

Comments

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    Just to close the loop on this, it was discussed on the FaceBook Enthusiasts group and is now resolved. One of the radios had to be reset.

  • ka9ees
    ka9ees Fithian IL USAMember ✭✭✭

    @Mike-VA3MW

    Thanks again for everything Mike!

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.