FMH-2 and Flex modular cable with Maestro.

ka9ees

I bought this cable so that I could use the hand mic with the Maestro. No matter how I configure it, I don't get any audio from it. It's set to default FMH-2, M-MIC2 is selected. I've tried it with the DX setting too. I'm at a loss. Maybe I got a bad cable. It's probably too late to return it.

73,

Ed KA9EES

K0FLY

ED:

The FHM-2 mic needs a bias voltage. The FHM-2 profile maybe corrupted. Just for the heck of it go to Maestro's MENU screens. Then select the "Phone/CW" menu. At the top of the menu verify that the Maestro Microphone Bias is on (radio button is white). It is also help full to enable the "Level Meter During receive feature", Enable just below the mic bias selection.

Also in the Transmit Menu enable MIC2 PTT (its near the top of the screen).

Gayle K0FLY

ka9ees

@K0FLY Hi Gayle,

I've tried it both with and without bias. And as you can see in the pic. I have mic2 selected. I think I'll see if I can get a replacement.

73,

Ed KA9EES