Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.18 | SmartSDR v4.2.18 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

6600M: USB A- to USB-A null modem cable not getting recognised

Holger Hannemann
Holger Hannemann Member ✭✭
edited April 2020 in FLEX-6000 Signature Series
I bought a few FTDI null modem cables USB-A to USB-A to connect my Flex 6600M to a RF-2k amplifier. The Flexradio does not recognize the USB cable and consequently doesn't offer a window with settings. 

Any ideas how to get this working?

thanks in advance
Holger, ZL3IO

Answers

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited April 2020
    Hi Holger

    if you plug it into a PC as a test does the pc see it?

    mike
  • Tom W3FRG
    Tom W3FRG Member ✭✭
    edited April 2020
    I have been using the following usb cable since I built my RF 2K with the Flex 6600M and it almost installed itself automatically.
    Is your cable a NULL Modem type?

    FTDI USB-NMC-2.5M , CABLE, ASSEMBLY; NULL MODEM; USB-A TO USB-A; 2.5M

    Once installed it should show up on the " USB Cables " window where you can click " Enabled ".
    Hope you find your issue as the CAT works great with the RF 2KAmp.




    GL Tom W3FRG

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories