Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.
Best Of
-
Re: Flex 6700 and the Q5 Signal Five Band Transverter - what options to order?
Hi D.ick, I prefer common IF so that I don't have to mess with an additional cable and use up an RX port. On the other hand, if you are planning on using external filtering or RX amplification, …1 -
Re: Flex 6700 and the Q5 Signal Five Band Transverter - what options to order?
Oh… I misspoke slightly. When I mentioned RX amplification, that is when you want split RF, not split IF. For the Flex, split IF is normally the way to go. Once you get your transverter, check out th…1 -
Re: Network cleanup -- and the results
I guess I saw it in the manual……… 7.6.1 Ethernet Cabling Requirements The FLEX-6400M/FLEX-6600M is designed to use CAT5e or CAT6 Unshielded Twisted Pair (UTP) network cabling. If you need to make a n…1 -
Re: Network cleanup -- and the results
If you're replacing old, damaged, or kinked cable and connectors, or if your old stuff is cat3, then any new cat6 (or even cat5e) will be an improvement. Given that cat8 is intended for short ru…1 -
Re: Are router WAN/LAN ports that used as LAN ports on the same network and subnet?
The data moves pretty fast, so you will find that even if it has to go all the way back to the router/switch, you won't notice the difference. You can easily test this using Ping and watch the r…1 -
Re: Phase Cancellation in Diversity Receiption for Dual SCU Radios
For significantly less money than the NCC-2, I have a Timewave ANC-4 noise canceller. It is invaluable here in the suburbs. As Mike mentioned, there are some things that it will not take out. I think…2 -
Re: Phase Cancellation in Diversity Receiption for Dual SCU Radios
Of course, these added features would have to be incorporated into Maestros and the front panels of M models.1 -
Re: Phase Cancellation in Diversity Receiption for Dual SCU Radios
Neil, the front panel and the SmartSDR display are simply interfaces. The real magic takes place in the radio. The displays can easily be updated to add the necessary visual part. James WD5GWY1 -
Re: Phase Cancellation in Diversity Receiption for Dual SCU Radios
Should have been more specific in my earlier post. Thank you for clarifying, James. It is the "Phase Cancellation" feature I am most desire, to eliminate noise that affects lower frequencie…1 -
Re: Phase Cancellation in Diversity Receiption for Dual SCU Radios
Phase Cancelation is something I wish Flex Radio would add to Diversity Reception in SmartSDR for the dual SCU radios. It still surprises me that they stopped short of having Phase Cancelation since …1
