Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.
Best Of
-
Re: New monitor. Connect to flex 6600M.
John You are operating in MultiFlex. The 6600M and the PC SmartSDR are two separate radios. If you want the 6600M front panel and the PC to be the same radio, and thus a change on one will show as a …1 -
Re: Flexradio 6600 vs 8600?
Mike, does this mean just because we can doesn't mean we will? Your statements don't instill a lot of confidence that many things a lot of us have hoped for, sooner than later, like Phase C…1 -
Re: Output Control
Use the TX Band Settings in SSDR to set the power output level you want, for each separate band.1 -
Re: Output Control
Glenn, there is a PGXL / Flex radio Node-RED FLOW that Alan helped me with that I use so that when I hit TGXL Tune on the Flow it disables the PGXL and raises the Radio power to what ever I want the …1 -
Re: New monitor. Connect to flex 6600M.
Bear in mind that, if you so desire, the 6600M operates well without a computer. You can plug a large monitor into the radio’s HDMI connector. Between the radio’s knobs and buttons and its front pane…1 -
Re: New monitor. Connect to flex 6600M.
Thanks James will check it out.1 -
Re: PG-XL and Meffa ??
James I had not used Meefa since I bought the PGXL almost a year ago because it behaved a title strange with SWR. I also didn’t have an understanding how it worked. Due to RFI issues in my house I ra…1 -
Re: Maestro C Edit TNF
Thanks, I believe that once you reach TNF editing function. one can use the TX menu knob on the Maestro C for editing the TNF. The trick is getting to the editing function. So far, zooming has not be…1 -
Re: Flexradio 6600 vs 8600?
well personally I would recommend to any one that asks “Don’t by a Flex until software gets out of stagnant mode”. What’s the point of new hardware running the same clunky software.1 -
Re: Flexradio 6600 vs 8600?
Hi Trucker, The implementation in SmartSDR is primitive by comparison to that in PowerSDR. And it looks like it's going to stay that way. Tragic. Russ KR6W3
