Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Best Of
-
Re: How do I specify to connect to a particular radio on my Network?
Hi Brad, you mention C# in your original post. Are you using FlexLib (.net) or just straight C# without the Flex .net library? I am (once again...) locked out of my own Visual Studio on my own comput…2 -
Re: Stuttering CW
For those suffering from power drop-outs when using CW, it seems the only solution is to go back to SSDR 2.4.10 ! It do suffer a bit from jittery CW, but no power-loss. For those running 24/7 it may …2 -
Re: How do I specify to connect to a particular radio on my Network?
Brad From the Flex WiKi, https://github.com/flexradio/smartsdr-api-docs/wiki, The "Primer from G3WGV is a little dated, but it will explain everything you need to know. Alan. WA9WUD1 -
Re: Windows Newbie
Assume you have a M1 Mac running Windows Parallels. This means you have an ARM-based Windows PC. First, Windows DAX and CAT will not run on Windows ARM For the other devices, go to the device configu…1 -
Re: How do I specify to connect to a particular radio on my Network?
The discover broadcast packets sent out from the radios contain s/n and IP. Use that to listen for the radio you want (s/n) then connect to that IP. Dave wo2x1 -
How do I specify to connect to a particular radio on my Network?
Hello, I have two Flex 6400s on my LAN. SmartSDR works well with both of these radios. I'm developing a unique program using C# to assist me in POTA contacts. The two radios are as follows: #1 6…1 -
Re: flex 5000a 2rx
1 -
Re: FRstack 3 Not Booting
This is often a Windows Firewall issue. You might trying turning the firewall off and see if it works.1 -
Re: Stuttering CW
I'm with you, Ed! That's NOT the right reason for excluding newer technology to improve our signals.1 -
Re: Stuttering CW
I'd call that "intentional interference".1
