Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Best Of
-
Re: 6600M Chimes on TX
Update. First, thank you, everyone, for the comments and suggestions. I resolved my issue, or at least made it acceptable, and wanted to share in the event someone runs up against it. Everyone was on…2 -
Re: Introducing Deck Master 6000 a Stream Deck plugin to control Flex-6000 series radios
Deck Master 6000 is now available from the StreamDeck plugin store. I'll keep publishing new releases and attempting to maintain the documentaion at GitHub too. Since the plugin store provides a…1 -
Re: TeensyMaestro
Spent some time with 1.042 and concentrating on the CW issue. Did the same "testing" as with 41, and it seems that the debounce issue really was causing my problems as I have yet to notice …1 -
Re: Interlock is preventing Transmission AMP-TG
I had this issue immediately after updating the firmware on my TGXL and AG. It persisted until I powered everything down -- radio, amp, tuner, and AG, and turned them all back on again. It hasn'…1 -
Re: External display in FLEX-6600.
Hi David, Happy New Year! Only the 6400M and 6600M models have an HDMI port. The display comes from the client (SmartSDR, front panel or Maestro), not from the radio which has no capability to displa…1 -
Re: Interlock is preventing Transmission AMP-TG
While not happening as frequently as it has previously, it still is happening. I noticed during yesterday's contest, all of a sudden during a transmission I would receive a warning message about…1 -
Re: Smartlink port forwarding on Ubiquiti DMPro
Here is my '6400 Network: Yours looks good to me ... No, you don't need a fixed-IP from your ISP. The Flex appears to liek-and-use it's own choice of 255.255.255.248 which is more-cons…1 -
Re: FLEX 6400 M internal speaker
Press Menu on the front panel. Press "Audio". You will see "Front Speaker". Press "enabled" and it will then read "Disabled". Press "Exit at top left. Fix…1 -
Re: HELP with SmartSDR CAT and FLDIGI
I found that after initializing my RigCAT setup, I had not only to save, but to close FlDigi and restart it. Then things worked really well. I also found that it always helps to open SmartSDR CAT and…1 -
Re: Smartlink port forwarding on Ubiquiti DMPro
@WY5PER UPnP is the spawn of the Devil ☹️ Please exhaust any and all other ideas before UPnP. I also use a UDM-Pro, with 8.0.24 software. Port Forwarding has proven solid and reliable in my case. Alt…1
