Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Best Of
-
Re: how to properly close and de-energize the 6400 ?
The amber light indicates your GPSDO is in “stay alive” mode. This means you don’t have to wait several minutes while the GSPDO spools up when you turn on the radio. I just leave my power supply and …1 -
Re: how to properly close and de-energize the 6400 ?
I keep my 6600 connected to a power supply at all times, too. But I'll admit that it bothers me to keep a full 35 amp power supply powered up 24/7. (yes, I realize that it's not putting out…1 -
Re: Grounding
All household appliances require a safety ground or are you talking about RF ground - Not in the electrical code but an excellent thing to do.1 -
Re: Grounding
I don't have a PG-XL, but the safety ground must be part of the power plug and the RF ground is an external chassis bolt/connection.1 -
Re: how to properly close and de-energize the 6400 ?
The flashing red when the rig is off and you shut down your supply is the beginning of the low voltage flash sequence as the capacitors discharge. This is normal.2 -
Re: Fldigi on SmartSDR for Mac
For many of the same reasons I have given up on SSDR Mac. Perhaps one day, I’ll try again.1 -
Re: M-629 mike
I have the manuals. I have the info on the Mike. I looked for it for 2 days and could not find a definite answer so I, turned to this community Rick.1 -
Re: Flex 6700 2 meter offset
Tried the same from the Maestro. MENU-MEMORY will switch from simplex to repeater up .6 correctly but again the display remains showing "SIMP" for both simplex and up 6001 -
Re: Flex 6700 2 meter offset
Hi Terry, I wonder if it is a 6700 problem. What happens if you use the built-in 2 meter transverter? Hi Stan, are you running a 6700 or one of the other 6000 series rigs? My 6400, also running Smart…1 -
Re: Flex 6700 2 meter offset
I checked this out and found: Version V3.5.9 The memory setting of +.6 does work, in that it transmits up 600Khz and setting +0 simplex also works BUT - The SSDR screen is NOT UPDATED, nor can I chan…1
