Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Best Of
-
Re: SmartSDR v4 – Noise Mitigation Quick Reference
Mike, The audio on v4.1.5 is very distorted, watery, fatiguing audio hard to listen to for very long . I have tried a combination of the filters. I couldn't never get the audio to sound natural.…1 -
Re: SDC Skimmer for Flex Radios
Hi! Ken, your error is that you have selected the wrong audio device. For the skimmer you need an IQ stream, for example, DEFAULT: DAX IQ RX 1 (FlexRadio…) Select the "SmartSDR API" control…1 -
Re: Flex Radio 8400M manual
Until new documentation is available, the 6000 series documentation is more than adequate to get you going. https://www.flexradio.com/documentation/smartsdr-software-user-guide-pdf/ The M version fro…1 -
Re: Setting band limits?
On the IC-7300, I was able to program my own band edges, and changed them from the defaults to match my FCC General ranges, so that I could not transmit outside of my privileges. Right now we have pe…1 -
Re: Where is RF Gain slider in v.4.1.5?
Glad you found it Jake! Yes there are some differences I guess due to the screen size on the radio/Maestro. The Mac version of SmartSDR had been styled to look similar to the Windows version, so perh…1 -
Re: Where is RF Gain slider in v.4.1.5?
Finally! That was the key! I had to use the side pop-out menu rather than simply clicking on ANT1 in the Slice box. That is completely different then how it works on the actual 8400M radio screen! * …1 -
Re: Where is RF Gain slider in v.4.1.5?
Jake, Click on the right-pointing arrow at the top left of your screen. Additional selections will appear where you can make the necessary adjustments. Bill1 -
Re: Where is RF Gain slider in v.4.1.5?
Got it this time. You're clicking on the Ant1 on the slice flag. But I'm talking about the left side slide-out menu, you need to click on this arrow: Then about half way down there's a…1 -
Re: Integration of LP-500 or LP-700 in my FLEX station
I have the LP700. Four total sensors. Channel 1 between radio Ant1 and PG XL input A. Channel 2 between PG XL A output and TG XL A input. Channel 3 between radio Ant2 and PG XL B input. Channel 4 bet…1 -
Re: SmartSDR v4 – Noise Mitigation Quick Reference
I also got fed up with V4.1.5 went back to V3.10.15 and my radio is a lot quieter and I have control. Richard WH6S1
