Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
-
Re: Control of AGC Default Level Setting
It would be most helpful if AGC persistence would remember settings not just by band, but by band and mode. The AGC settings I use for 20m FT8, for example, are very different than the AGC settings I…1 -
Re: Is this a valid method for setting AGC-T?
@NN4ZZ I would settle for having SmartSDR remember last AGC settings by band and by mode. Tim K9WX3 -
Re: Operational Gripe from a VHF+ Rover
The original post from Mark K2QO rings true to me. He speaks to a VHF contesting scenario, but I have similar concerns for general use on HF. I will use AGC and AGC-T as my example. SSDR remembers AG…1 -
Re: Change RF power output setting so all bands are set to transmit at the same power?
Whether or not profiles should autosave is a very old topic on this board. See https://community.flexradio.com/discussion/7887668/profile-auto-save-discussion/p1 If you read through all of the postin…1 -
Re: Audio crackling and popping
I recently upgraded to SSDR 2.8.1 from 2.4.10 and noticed this same thing, a popping or crackling sound on CW. Although in my case remote operation is not involved. I tested and eliminated network pe…2
