Upgrading to V2 - read me first

  • 13
  • Idea
  • Updated 2 years ago
  • (Edited)
When you upgrade to V2, there are a few things that you want to do before you jump in.

There is no requirement to uninstall any previous version of SSDR but you can if you wish.  Personally, I just delete the icons off my desktop first so I don't get confused.  Also, there is no requirement to actually upgrade to V2 unless you wish to.  You can always continue to use V1.

Spend a few minutes review these great videos by Dave WO2X. 

These will cover just about everything and make your experience a whole lot easier especially if you didn't look at the manual.  :)
If you don't want to use SmartLink, there is no requirement to create an account, so you can skip all that part.  SmartLink is only required for a WAN type of connection.  Like being at Starbucks and working the latest DX.
Ok, so you are ready to go.  The radio has to communicate with the Flex Servers, so it has to have access to the internet.  If your radio is plugged  into your home internet just like your SSDR computer, you should be good to go.  This is a must have.


If your radio is plugged directly into your computer and it's IP address begins with something like 169.xxx.xxx.xxx, then the radio can't call FRS and the upgrade will not completed.  Simply put this is because Windows does not link the LAN/WIFI ports together (more on this coming) and Microsoft does this by design.  

You can see the radio IP address within SmartSDR or your Maestro.

If that is the case, you have 2 options.  

  1. Connect the LAN cable on your radio directly to your router and power it on.  This will allow the radio to complete the licensing.  You can continue to use SSDR as usual and it will find the radio (for 99% of you).   Your IP address of your radio will likely now look like 192.168.xxx.xxx or some other home router assigned IP address (DHCP assigned).  You only have to do this once for the licensing process to complete.  After that, you can go back to the way you had it connected.
  2. You can set up Internet Connection Sharing (ICS).  Matt describes it here:  https://community.flexradio.com/flexradio/topics/v2-0-for-those-connecting-their-radios-directly-to-....  This will link your LAN ports together.
At this point, if you  licensing fails, please open a help desk ticket, but only after you have confirmed your radio has internet access.  https://helpdesk.flexradio.com/hc/en-us/.  

Make sure you send in your radio's serial number so we can look it up and make the required changes.

If you are never going to use SmartLink, then there is no need to login to or create an account.  If that is the case, you have completed your upgrade and use the radio as you did before.

 If you are, review the above videos and the manual which can be downloaded from here:  http://www.flexradio.com/downloads/smartlink-quick-start-guide-for-smartsdr-pdf/

For your Maestro to update, both it and the radio must have access to the internet.

I think I have covered most of the basic items.  

73, Mike va3mw



Photo of Mike va3mw

Mike va3mw

  • 824 Posts
  • 198 Reply Likes

Posted 2 years ago

  • 13
Photo of Ken Hansen

Ken Hansen

  • 328 Posts
  • 110 Reply Likes
Wish I could have liked this more than once!

Excellent resource, really appreciate your taking the time to compile this.

I know this will lead me to success when I upgrade tonight, thanks.

Ken
Photo of Mike va3mw

Mike va3mw

  • 824 Posts
  • 198 Reply Likes
I apologize for a few typo's.  For some reason, I can't go back and edit it.
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 4233 Posts
  • 1351 Reply Likes
Michael, I don't think you can go back and edit once someone has commented to it. At least that has been my experience. It can be especially frustrating when someone posts comments while I am in the middle of editing the typos in my post, and it shuts me out and won't accept the edits, giving me a red-top error screen....,
Photo of Brad A. Steffler

Brad A. Steffler

  • 92 Posts
  • 32 Reply Likes
I normally connect the radio to the router through a 4-port switch. The switch then goes to the 4-port switch/ router/cable modem combination on the second floor of my house. Is this the same as connecting directly to the router, for IP purposes?

Brad
KE4XJ
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9186 Posts
  • 3547 Reply Likes
Yes.  It is the preferred way to connect your radio to your local LAN.
(Edited)
Photo of K1UO - Larry

K1UO - Larry

  • 865 Posts
  • 135 Reply Likes
Yes Brad,  You should be good to go.  That is the same hookup I use and the update went perfectly.
Photo of Kevin Hartley

Kevin Hartley

  • 13 Posts
  • 0 Reply Likes
Upgrade went smooth after a re-boot of the Maestro, and both it and my 6500 synced up with Smartlink. The above was very helpful, along with the Flex upgrade manuals. Next step for me is to buy smartdsr for iOS.
(Edited)