TX 1 2 3 not working

  • 1
  • Problem
  • Updated 4 months ago
OK just got the Flex 6700 back from fan repair...thanks for that...but TX1 2 3 are not keying my amp.  They are enabled.  What am I missing????
Thanks
Peter
Photo of W2PP

W2PP

  • 309 Posts
  • 42 Reply Likes

Posted 4 months ago

  • 1
Photo of mikeatthebeach .

mikeatthebeach .

  • 270 Posts
  • 43 Reply Likes
Guess you could Reset Radio. If that does not work 
Downgrade to lower version try it out then upgrade to higher version
Which Amp are you using ?
73 Mike
( Use an Ameritron Buffer switch here between Flex and Amp here )

(Edited)
Photo of Andreas Junge

Andreas Junge, Elmer

  • 42 Posts
  • 3 Reply Likes
Are you running DDUTIL ?

If yes, that would be a good starting point to check as it enables/disables TX lines for different amps. 

73, Andreas, N6NU
Photo of W2PP

W2PP

  • 309 Posts
  • 42 Reply Likes
Not using any other programs. I can short the cable ends and the amp keys so it’s not the cable. The radio was reset nadda
Peter
Photo of Andreas Junge

Andreas Junge, Elmer

  • 42 Posts
  • 3 Reply Likes
And the TX outputs are enabled?


Photo of W2PP

W2PP

  • 309 Posts
  • 42 Reply Likes
Yes they are
Photo of AA0KM

AA0KM

  • 344 Posts
  • 60 Reply Likes
Enable a profile and check.
If not enabled maybe add it to be ( on) in the profile and save.

Photo of W2PP

W2PP

  • 309 Posts
  • 42 Reply Likes
They are enabled
Photo of AA0KM

AA0KM

  • 344 Posts
  • 60 Reply Likes



Do you have any global profiles in the drop down menu?

Might make create  a new profile and add the Tx-1,2,3.
Not sure what (*default) entails.

Photo of W2PP

W2PP

  • 309 Posts
  • 42 Reply Likes
I have tried multiple of my profiles
Photo of AA0KM

AA0KM

  • 344 Posts
  • 60 Reply Likes




These profiles will change as you change them on the main Ssdr software interface in the back ground.

Photo of Jay / NO5J

Jay / NO5J

  • 1577 Posts
  • 227 Reply Likes
The " * " indicates that changes have been made to the Default Profile, and haven't been saved.

    #FlexRadio IRC chat

For real-time discussions

        SDRgadgets

User created documentation.
           Volunteer!!

         73, Jay - NO5J

Photo of W2PP

W2PP

  • 309 Posts
  • 42 Reply Likes
OK solved, what a moron....I used a picture of the rear of the 6700 off the internet that was WRONG.  I had the PTT lines in the wrong places....man...once in the correct spots of course it worked.  How embarrassing to say the least
Peter

Photo of W2PP

W2PP

  • 309 Posts
  • 42 Reply Likes
Well, some progress but things are not right.  Only TX1 toggles the amp.  I've tried disabling all of them, and nothing happens, .....if I enable TX2, then TX1 toggles NOT TX2, ....enable TX1 and TX1 works just fine.....I can short the cables of course then things work fine....thoughts????
Peter
Photo of W2PP

W2PP

  • 309 Posts
  • 42 Reply Likes
OK, how might I do that?
and thanks
Peter
Photo of Neal Pollack, N6YFM

Neal Pollack, N6YFM

  • 127 Posts
  • 56 Reply Likes
And, you don't need to refer to yourself as a moron, for making a simple human mistake.
[The only thing I hate more than perfect people, are the ones who THINK they are perfect! :-)  ]

Cheers,

Neal
(Edited)
Photo of W2PP

W2PP

  • 309 Posts
  • 42 Reply Likes
I think Patton said something like that!
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 2968 Posts
  • 652 Reply Likes
Peter, hold the center button in on the multi button while also holding in the power button,,so both together...the front screen will count down to 0,,then release buttons..
The light on the power button will flash white when it is resetting.
Photo of W2PP

W2PP

  • 309 Posts
  • 42 Reply Likes
Tim and I have been emailing....looks like its hardware so home it goes....thanks all.