• 1
  • Problem
  • Updated 2 years ago
  • Solved
The RFMD ARC JUST unboxed our new 6700 today.  Followed the QSG, upgraded to the latest SSDR(v1.6.21) 6700 firmware was good to go.  SSDR 'sees' the 6700 as it displays the Model type correctly, and shows a 192.168.2.X IP address.  The SSDR computer and 6700 are connected to the same Ethernet hub.  The 6700 HW Version is: v1.6.21.77.

Alas, when we 'click' on the green 'Connect', SSDR just freezes.  Did we miss something?

Photo of Duane Brantley

Duane Brantley

  • 2 Posts
  • 0 Reply Likes

Posted 2 years ago

  • 1
Photo of Stu Phillips - K6TU

Stu Phillips - K6TU, Elmer

  • 642 Posts
  • 256 Reply Likes
You are probably being bitten by the IP firewall in Windows and/or in your AntiVirus software,

Step 1: Turn BOTH OFF

If you can then connect, you will need to find the appropriate steps to allows SmartSDR, SmartCAT and SmartDAX to be allowed network access.

Stu K6TU
Photo of Duane Brantley

Duane Brantley

  • 2 Posts
  • 0 Reply Likes
Apparently you need to reboot the radio after upgrading SSDR.  All is well now.

Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 3770 Posts
  • 1150 Reply Likes
Yep...when in doubt...reboot!  that's my motto.
Photo of Ernest - W4EG

Ernest - W4EG

  • 583 Posts
  • 112 Reply Likes
There are two (2) message with the same questions from Duane Brantley...
In this forum... 
That Stu K6TU answered,

This conversation is no longer open for comments or replies.