PTT and front LED not in sync

  • 1
  • Problem
  • Updated 4 years ago
  • Acknowledged
Why chasing FT4TA I've noticed an interesting item regarding PTT and the front LED while using CWX    When I use the function keys to transmit a stored message, the front LED would switch to red indicating transmit but then would almost immediately switch back to blue even though the message continues to be transmitted properly.
It would seem the led should be red as long as the transmitter/ptt is on.
I'm guessing the led is red while the message is being load into the transmit buffer then switches back to blue.
Photo of Dave - WB5NHL

Dave - WB5NHL

  • 275 Posts
  • 62 Reply Likes

Posted 4 years ago

  • 1
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3478 Reply Likes
Official Response
I have entered this problem report into our bug tracker for additional investigation. Thank you for the defect report.