Need help connecting ethernet directly to MacBook Pro using Parallels

  • 1
  • Question
  • Updated 3 years ago
  • Answered
  • (Edited)
I have been enjoying the use of my 6500, but I have not yet discovered how to connect the ethernet cable directly from the radio to my Mac using Parallels so that I can see the radio.  I really need to do this because I have an off-grid installation and my inverter is quite noisy.  If I shut down the inverter and run on battery I need to be able to do a direct connection.  I have a MacBook Pro running Yosemite, and I am running the latest version of Parallels with Windows 7.  FlexRadio does not provide support with this issue.  Can any of you help?
Photo of Alan - KA4B

Alan - KA4B

  • 107 Posts
  • 11 Reply Likes

Posted 3 years ago

  • 1
Photo of George Molnar, KF2T

George Molnar, KF2T, Elmer

  • 1542 Posts
  • 547 Reply Likes
Official Response
http://kb.parallels.com/en/4948 May be of assistance. You will need to ensure the wired ethernet connection is bridged to your VM. Enjoy!