• 4
  • Question
  • Updated 4 years ago
  • Answered
Having some issues setting n1nmplus up with 1.6. In previous version I had cat working and could have a and b slices in so2v mode and freqs wouldvchange and i had two bandmaps open with spots into both.

Is there a new tutorial for set up with 1.6 available?

With 1.6 in so2v mode slice b is not being read. In so2r mode it just slaves slice b second radio to slice a freq. Clearly i have set it up wrong in either mode.

Any help available to get it sorted please - or maybe i need to read the new cat and dax sections a second time?


Steve gw0gei gw9J
Photo of Steve Jones

Steve Jones

  • 104 Posts
  • 23 Reply Likes

Posted 4 years ago

  • 4
Photo of Eduardo Carvalho - KC8R

Eduardo Carvalho - KC8R

  • 79 Posts
  • 7 Reply Likes
Official Response

I was able to get N1MM+ with the 6300 and the new CAT. I was also struggling, since before the SO2V worked perfect and switched the TX. The trick is below:

1. Set a new CAT port for slice B
2. Select SO2R (instead of SO2V)
3. Make sure the radio numbers are different

N1MM should get all set up, including bandmap.

The only problem I have now is the TX focus, there is not really an easy way to change the TX. 

Does anyone know how to switch the TX focus?

Eduardo, KC8R