N1MM Voice Keyer

  • 1
  • Question
  • Updated 4 months ago
I have successfully recorded voice messages on the N1MM application for use with my Flex 6400. The messages are audible on playback on my laptop when pressing the F-keys. Problem is, the rig is not transmitting the messages.

Anyone have the solution to the following issues while using N1MM voice keying:

1. Port the audio from the laptop to the 6400, and,
2. Key the rig to transmit the recorded messages

Given the popularity of N1MM, someone has surely resolved this issue before.

Thanks in advance for your assistance.
Photo of K3WR - Jim

K3WR - Jim

  • 15 Posts
  • 0 Reply Likes

Posted 4 months ago

  • 1
Photo of Craig - KØCF

Craig - KØCF

  • 137 Posts
  • 44 Reply Likes
In N1MM+ "Config" menu, choose "Logger+ Audio Setup". In this dialog, click the "Playback" tab, then in the drop-down under Radio 1, select "DAX Audio TX (FlexRadio Systems)". Then in SmartSDR, in the "PHNE" control panel, click the "DAX" button. It will turn blue to indicate it is active. You will also need to define a PTT port in SmartSDR CAT, and connect N1MM+ to that. You can use either a foot switch or VOX for live voice with your radio Mic. It all works very smoothly.
73,Craig, KØCF
Photo of K3WR - Jim

K3WR - Jim

  • 15 Posts
  • 0 Reply Likes
Thanks Craig, got the N1MM voice keyer working now.
Photo of Clay N9IO

Clay N9IO

  • 522 Posts
  • 123 Reply Likes
Yes thanks for putting us on the fast track.
This is on my to do list.