How to: Setup N1MM+ for keying the Flex 6X00 via CWX

  • 10
  • Praise
  • Updated 2 months ago
  • (Edited)
It just took a moment to set keying my Flex 6300 via N1MM+.

If somebody is intersted, here you go:

  • Start N1MM+.
  • Open the CW Message Editor (right click on one of the predefined F-Key macro buttons in the VFO windows.
  • Copy and paste the following macro definitions:
## N1MM Logger+ CW Default Function Key File
#
# This file can be used in most CW contests that have a simple exchange
# The {EXCH} macro uses the contents of the Sent Exchange box in the contest setup
# The {SENTRSTCUT} defaults to 5NN or allows manual entry of signal report
# F5 uses "!" macro for his callsign
# Do not use the {CALL} macro in place of the ! macro
# S&P F1 calls QRL? before placing the program in RUN mode for calling CQ
#
# To respond to caller, send F5 then F2, or ; (default exchange key) or 
#   Insert, or Enter in ESM
#
#
###################
#   RUN Messages 
###################
F1 Cq, {CAT1ASC KY cq test  {MYCALL} {MYCALL};}
F2 Exch, {CAT1ASC KY {SENTRSTCUT} {EXCH};}
F3 Tu,{CAT1ASC KY tu ;}
F4 {MYCALL},{CAT1ASC KY {MYCALL};}
F5 His Call,{CAT1ASC KY !;}
F6 Repeat, {CAT1ASC KY {SENTRSTCUT} {EXCH} {EXCH};}
F7 Empty, 
F8 Agn?,{CAT1ASC KY agn?;}
F9 Nr?,{CAT1ASC KY nr?;}
F10 Call?,{CAT1ASC KY cl?;}
F11 Empty, 
F12 Wipe,{WIPE}
#
###################
#   S&P Messages 
###################
F1 Qrl?,{CAT1ASC KY qrl? de {MYCALL};}
F2 Exch,{CAT1ASC KY {SENTRSTCUT} {EXCH};}
F3 Tu,{CAT1ASC KY tu;}
F4 {MYCALL},{CAT1ASC KY {MYCALL};}
F5 His Call,{CAT1ASC KY !;}
F6 Repeat,{CAT1ASC KY {SENTRSTCUT} {EXCH} {EXCH};}
F7 Empty,  
F8 Agn?,{CAT1ASC KY agn?;}
F9 Nr?,{CAT1ASC KY nr?;}
F10 Call?,{CAT1ASC KY cl?;}
F11 Empty,  
F12 Wipe,{WIPE}
  • Save the changes.
  • Ready.

Now the macro buttons and F-Keys in N1MM+ can be used to key your Flex 6X00.

You can use all N1MM+ macros that way. 

If you have any questions, please do not hesitate to contact me.

VY73
Tom
DK1EY
Photo of DK1EY

DK1EY

  • 177 Posts
  • 47 Reply Likes
  • irie!

Posted 4 years ago

  • 10
Photo of Stu Phillips - K6TU

Stu Phillips - K6TU, Elmer

  • 642 Posts
  • 256 Reply Likes
VERY NICE!

I used N1MM+ this weekend in the Cal QSO Party for the first time!  I used an external WinKeyer for keying instead of this...

Can you use this to also amend how the CW speed is adjusted?
Stu K6TU
Photo of Sergey, R5AU

Sergey, R5AU

  • 805 Posts
  • 97 Reply Likes
Hi Stu, Tom, I am using CWX with the N1MM+ and other loggers already over the month, but no chance to change the speed via CAT interface , KS command for internal Keyer only., I have posted it already.
(Edited)
Photo of Ned K1NJ

Ned K1NJ

  • 301 Posts
  • 75 Reply Likes
   Sergey, "CAT1ASC" is an N1MM macro language command.  Do other loggers
support these commands?  Which ones have you used?

     Ned,  K1NJ
Photo of Sergey, R5AU

Sergey, R5AU

  • 805 Posts
  • 97 Reply Likes
Ned, yes of course, ex.: MIXW: <CATCMD:text_command> - sends the text to the transceiver.   do not forget start with <TX> and end with <RX> this Macro, ex:

<TX>
<CATCMD:CAT1ASC KY cq test  {MYCALL} {MYCALL};>
<RX>

Any logger who is able to send TEXT  via CAT can do it. 
Photo of Ned K1NJ

Ned K1NJ

  • 301 Posts
  • 75 Reply Likes
           It doesn't work in N3FJP.  Although it sent cw via CAT to the '5000,
apparently the CAT commands N3FJP uses are not being interpreted the
same way by the 6000.  Macro commands like <TX> are seen as the literal
characters TX and sent as such.  I have sent a note to the authors asking
about this.
       Freq. band, and mode data are OK, but cw via the F-Key buffers is not
working.  It would have been nice to have preserved CAT compatibility from
the 5000/PSDR to the 6000/SSDR.

Ned, K!NJ
Photo of Sergey, R5AU

Sergey, R5AU

  • 805 Posts
  • 97 Reply Likes
Ned, i don`t know excatly but i not remember that 5000`s has CWX implemented, if not means no chance unfortunately, but with 6K it is work well whуre just looking for KS command intergation for CWX 
(Edited)
Photo of Steve W6SDM

Steve W6SDM

  • 622 Posts
  • 280 Reply Likes
Thanks for this.  Setting up N1MM Plus is on my list of things to do and you saved me a ton of time.
Photo of DK1EY

DK1EY

  • 177 Posts
  • 47 Reply Likes
Does anyone get sending CW via "Ctrl+ K" in N1MM+ working? 

Yes, it does the same that CWX does, but single system operating via N1MM+ only would be much more handy.

VY73
Tom
DK1EY
Photo of Steve Gw0gei

Steve Gw0gei

  • 192 Posts
  • 50 Reply Likes
Thanks for the help - my new 6300 is now cat integrated with n1mm+ and macro working well ready for 6m rsgb contest later today. Only issue I have found so far is the cw speed seems to be fixed around 20wpm in n1mm+ with the control in n1mm+ not changing the speed. The cw speed control in ssdr only appears to change the speed of the paddle sending plugged into front of 6300. Have you found a way of changing the speed in n1mm that works? 73 Steve gw0gei
Photo of Ned K1NJ

Ned K1NJ

  • 301 Posts
  • 75 Reply Likes
Steve,
             The speed of the CAT1ASC KY text from N1MM  is determined by the setting of the
speed in SSDR CWX. 

Ned,  K1NJ
Photo of Steve Gw0gei

Steve Gw0gei

  • 192 Posts
  • 50 Reply Likes
Thanks Ned, I will give that a go tonight.
Photo of Asher - K0AU

Asher - K0AU

  • 170 Posts
  • 20 Reply Likes
These macros worked great (with appropriate tweaks) for SS.  Is there any way to get the N1MM ESC key to work and stop a CWX transmission?  Or is operation better integrated with an external Winkeyer like the K1EL?
Photo of Sergey, R5AU

Sergey, R5AU

  • 809 Posts
  • 97 Reply Likes
Well i see in any way so many issues exist with configure N1MM with SSDR, then i would like make step by step How TO (SSDR+ N1MM plus + Skimmer):
1. How it should look like finally:


2. Lets configure CAT and DAX with SSDR:
 

3. Lets configure N1MM:



4. Then lets configure ports with N1MM, CAT:

5. N1MM PTT port:

6. Of course SSDR setup:


7. Macros setup with N1MM:




8. and..... DDUtil for Skimmer connection(if skimmer was installed previously):





In case SO2V and SO2R some changes necessary in N1MM - selection setup,
instead DDUtil necxessary to SDR Bridge and Wintelnet for information merge from 2 instance of skimmers
(Edited)
Photo of William Hein

William Hein

  • 93 Posts
  • 10 Reply Likes
Thanks for the great step-by-step instructions, Sergey! Very helpful.

I seem to making progress, N1MM now gives me CW sidetone but does not keep the 6700. when transmitting CW from Logger+ I get the error message

"Transmit slice has not been selected" - this message appears multiple times each attempted tx.

I have the red TX box selected in Slice A and it is the only Slice I have open now.

Also I am weirdly getting a "COM19 is in use error" from Logger+, weird as I have not asked Logger+ to use COM19 (COM9 is where I connect to SSDR)

Here's my setup now:



how do I get Logger+ to tell SSDR which Slice to tx on?

73
Bill AA7XT
Photo of William Hein

William Hein

  • 93 Posts
  • 10 Reply Likes
I meant to say "...does not key the 6700..." above
Photo of Sergey, R5AU

Sergey, R5AU

  • 809 Posts
  • 97 Reply Likes
William, sounds strange, first message regarding active slice can appear only in case Red flag on the Active slice not selected - can you show please full screen short of you PC then you retrieve it? However with second message from the logger I think necessary to check againt setup of all items of the N1MM( from Radio till Digi), you right COM 19 just virtual end of the pair and should not be used
Photo of William Hein

William Hein

  • 93 Posts
  • 10 Reply Likes
It just started working (N1MM Logger+ keying SSDR / Flex 6700). I didn't change anything!

However, Skimmer has stopped working...

Bill AA7XT
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 3916 Posts
  • 1189 Reply Likes
Thanks!  That was very helpful.
 I set up Skimmer and the updated N1MM+ in about 30 minutes and ran it for several hours in the ARRL 160 CQ test last night.  It worked like a charm!  Having both of those programs really added to my S&P rate.  

Granted I am still a bit of a novice contester with poor antennas (OCF Dipole at 38 ft.) and low power.  But in 6 hours 15 minutes I was able to do 173 Q's, 5 DX, and 64 Sections for 22,528 points so far, and adding two of the four remaining states for the WAS on 160.  My Total score last year was 28420, so if I can operate some tonight, I will bust that score by a bunch.   (My Main Goal is finishing the WAS on 160)  I only have HI & AK to go, if CA & NV confirm via LOTW!  These may need to wait until I can get the Inverted 'L' up.

I still haven't tried to "run" a frequency.  not enough power and antenna for that yet.  Perhaps I will try it next week as W1AW/9 (Indiana)!

What a combo with the 6500.  Makes it a CW contesting machine.
Next I get to learn how to do SO2R, and other elaborate stuff.  but first things first....

Thanks again for your help getting CWX running on the N1MM+ platform.

Ken - NM9P
Photo of Sergey, R5AU

Sergey, R5AU

  • 809 Posts
  • 97 Reply Likes
Well nice to hear, you right for "run" necessary at least imaging a Big Gun location :-) Just work with W1AW/9  on 20m at 15:55 UTC  today, Ken you will be together with Ray K9DUR on position  ? 
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 3916 Posts
  • 1189 Reply Likes
Ray lives about an hour and a half away.  I will operate from my home station here in Washington, Indiana.  (I hope my schedule will allow a good number of shifts, but a pastor doesn't have a great deal of spare time in December!)

Ken - NM9P
Photo of Sergey, R5AU

Sergey, R5AU

  • 809 Posts
  • 97 Reply Likes
Nice to hear Ken, have a nice time to play with our toys, will be nice if you mail me ra3ajk@gmail.com  with available timeslot on W1AW/9  :-)
(Edited)
Photo of Steve Gw0gei

Steve Gw0gei

  • 192 Posts
  • 50 Reply Likes

I had n1mmplus working fine with cwx and the above copied macros until today!


Preparing for rsgb afs cw contest tomorrow and upgraded to latest version of n1mmplus this afternoon. set up the right contest template but when I have tested the n1mmplus ky macros I am losing the first character of each macro eg gw0gei sends -, .--  rather than --. ,.--. Same in his call macro it sends nw4ble rather than gw4ble. 

Can someone else please check the latest version of n1mmplus and their macros for cwx keying to see if you also have same issue.

Anyone have any suggestions as to what I should look for next?  I cannot see any setting in cwx that would effect and cause the missing first character being sent.


thanks


Steve gw0gei

Photo of Santos Rodriguez

Santos Rodriguez

  • 27 Posts
  • 1 Reply Like
Thanks Tom, the macro definitions for CWX work super !
Problem solved, so far. We just need the CW CAT implemented more elegantly in a future SSDR release.

Great Sergey.. fantastic summary, Thanks. !!
:)

Santos, EA4AK
Photo of N4FP

N4FP

  • 27 Posts
  • 1 Reply Like

I was told by someone at the Flex booth in Dayton that they have developed a new setup to integrate N1MM+ and the Flex 6X00 and that documentation should be available soon.  Anyone seen this?   I currently run N1MM+ on a separate computer with no integration with my 6300 and would like to fix that for Field Day with the latest, greatest.  Should I be running N1MM+ on the same computer I am running SDR and CAT?  Any advice will be appreciated.  

73, Wayne, N4FP

Photo of Stan - VA7NF

Stan - VA7NF

  • 411 Posts
  • 90 Reply Likes

The only thing that keeps the SSDR/N1MM+ computer near the 6700 is the USB->Serial->Keying transistor->6700 aux connector wire because neither DTR/RTS are not supported via Cat nor direct keying via TCP/IP. 

I hope this rumour is true and "test" code for the future Maestro keying is released in a few days. 

Stan
FD Chair Surrey Amateur Radio FD (This year look for VE7SAR 3A battery QRP)

BTW (Hijack alert) Can future software turn off the A-B biased final and make the 6000 a QRP rig?

Photo of Ken W6XB

Ken W6XB

  • 11 Posts
  • 3 Reply Likes
I set up N1MM with the function key macros CAT1ASC to key the Flex 6700 remotely via Smart Link.  My N1MM is at the operator local site.  It keys the remote transmitter just fine, but there is no sidetone.  Is there a way to get a sidetone at the operator local site?  I really need to hear a sidetone to get a feel for what is sent.  The CWX generates a nice local sidetone.  I am using virtual COM4 and it tunes the Flex remotely very well and sends great CW, albeit with no sidetone.  How do I get that sidetone?