How to set audio processor for DVK/DAX?

  • 1
  • Question
  • Updated 3 months ago
I know how to use the processor, mic gain and EQ for the MIC or BAL inputs. I use low power and listen on a dummy load and hear the difference when changing settings. But, I do not seem to be able to adjust the same for the DAX stream of recorded messages. TX gain is the only one.

How to adjust compression for DAX?

Andy
KU7T
Photo of Andy - KU7T

Andy - KU7T

  • 241 Posts
  • 24 Reply Likes

Posted 4 months ago

  • 1
Photo of Bill English

Bill English

  • 127 Posts
  • 18 Reply Likes
I noticed the same thing Andy. 
I think the only option would be to process the audio when you record it. All I see is the TX level in the DAX app controls.

Bill K4FX
Photo of Andy - KU7T

Andy - KU7T

  • 241 Posts
  • 24 Reply Likes
Is this what others are doing? Process in Audicity?

Andy
KU7T
Photo of Johan / SE3X

Johan / SE3X

  • 123 Posts
  • 48 Reply Likes
Yes, at least I do. Found it to be the best way of getting good audio out. Using N1MM and Audicity recorded files.

Always trying to adjust audio having my recordings sound as loud as when using the mic. Really dislike when answering someones recording and having a totaly different audio level coming back to me and/or even worse, a different voice. Only creating confusion and thoughts like "are there another station on the same QRG?" Who's answering me? 


(Edited)
Photo of Andy - KU7T

Andy - KU7T

  • 241 Posts
  • 24 Reply Likes
I played with this this morning. It appears that I was wrong. Processor and EQ is applied to the DAX TX stream as well. My main issue was I was running with too much gain and it sounded terrible. Now with tips being green and yellow but never red, all is good.

Andy
KU7T