How to enable PTT and disable QSK (N1MM+ / external winkeyer / 6600M)

  • 1
  • Question
  • Updated 2 weeks ago
I used CW delay long enough to get a semi break in QSK. Now, I am playing with new amp, and I would really just like to not use any QSK. I am struggling to setup the PTT to my liking. 

I would like to disable QSK on the 6600M and toggle PTT appropriately. I would like to get a 15 ms delay (as this is good for amplifier) and a very small tail time as well. If I would use the radio CW delay, its either too short so its still semi-breakin or too long, so I loose some receive time at the end of transmission.

How have others set this up correctly? Something in N1MM or in Winkeyer?

Thanks,
Andy
KU7T
Photo of Andy - KU7T

Andy - KU7T

  • 144 Posts
  • 10 Reply Likes

Posted 2 weeks ago

  • 1
Photo of Andy - KU7T

Andy - KU7T

  • 144 Posts
  • 10 Reply Likes
Disregard this. The cable that I thought I had was not connected. Once I connected Winkeyer PTT with PTT on teh rig, all worked.  Embarrassing...

73
Andy
kU7T