ham radio deluxe connection

  • 1
  • Question
  • Updated 3 years ago
Deleted all hidden Flex ports, removed SDR as instructed here, installed Win 10 and then reinstalled V1.4.16. Radio works fine. Cannot for the life of me get it to connect to HRD.
HRD says it is connection through Port 1. Any ideas?
Photo of Kevin Mahoney

Kevin Mahoney

  • 20 Posts
  • 2 Reply Likes

Posted 3 years ago

  • 1
Photo of Alex - DH2ID

Alex - DH2ID, Elmer

  • 891 Posts
  • 166 Reply Likes
Hello Kevin, could you please post some screenshots of HRD not connecting?
If you want to connect DM780, Logbook and HRD rotator to SmartSDR you need only to start MiniDeluxe first.

https://github.com/krisp/MiniDeluxe/wiki

This program connects to SmartSDR CAT and you can then start the other HRD
programs, which connect to the HRD server port 7809.



For PTT you need a SmartSDR PTT port.

73, Alex DH2ID
(Edited)
Photo of Kevin Mahoney

Kevin Mahoney

  • 20 Posts
  • 2 Reply Likes
some screen shots. Must be doing something basic wrong. Mini-Deluxe says it cannot open the server
Photo of Kevin Mahoney

Kevin Mahoney

  • 20 Posts
  • 2 Reply Likes
Photo of Kevin Mahoney

Kevin Mahoney

  • 20 Posts
  • 2 Reply Likes
Photo of Kevin Mahoney

Kevin Mahoney

  • 20 Posts
  • 2 Reply Likes
Photo of Alex - DH2ID

Alex - DH2ID, Elmer

  • 891 Posts
  • 166 Reply Likes
Kevin, are you using HRD and MiniDeluxe with a RIOX/DDUtil connection?
That won't work. Try to use only MiniDeluxe with the settings I posted above
and your own CAT port and the PowerSDR tab with SmartSDR ticked.

You don't need HamRadioDeluxe "Take Control" at all !
It is quite useless, as you have SmartSDR to set your TRX frequency and so on.

If you want to use DDUtil, OTOH, you just start this program without MiniDeluxe,
tick HRD 6.2 in the settings and start DM780, HRD Logbook and so on.



Of course you need the newest program versions:

MiniDeluxe 2.1.5506.2480
https://github.com/krisp/MiniDeluxe/wiki
DDUtilk V3 3.2.1.00
http://k5fr.com/DDUtilV3wiki/index.php?title=Download
HamRadioDeluxe 6.3.0.417
http://ham-radio-deluxe.com/downloads.html

Never use HamRadioDeluxe "Take Control" with a FlexRadio or other
SDRs, it clogs up your PC and has been written as an analogue
TRX CAT program only. That it can be used and has SmartSDR
settings does not mean that it works well.
MiniDeluxe or DDUtil are more than sufficient to transmit CAT
commands from SmartSDR to DM780 and the other HRD programs.
(Edited)
Photo of Kevin Mahoney

Kevin Mahoney

  • 20 Posts
  • 2 Reply Likes
Still having trouble. I am now on 1.5. I have downloaded Mini Deluxe and get a warning. Set up is shown below. Tried DDtuil and still no joy. When I say no joy I mean I can't get the rig to transmit through DM-780. I also am unable to move frequencies around quickly from the DM-780 screen but maybe that is the nature of not using the HRD module

Photo of Alex - DH2ID

Alex - DH2ID, Elmer

  • 891 Posts
  • 166 Reply Likes
COM1 normally is not a virtual port, but a hardware port. Look at all your ports
and delete unused ones. Remove all ports from SmartSDR CAT and restart.
Try MiniDeluxe only, do not use the DDutil port.Notice above that my port
is 6 and MiniDeluxe is set to server port 7809.
Photo of Kevin Mahoney

Kevin Mahoney

  • 20 Posts
  • 2 Reply Likes
I eliminated my virtual ports and then added two PTT ports. Went into device driver and only Com 1 is present. Also checked hidden ports. Maybe I should be adding a different kind. I still get the error message and DDutil is not running. I know I am missing something very simple