FRStack Version 2.1.30.4 Released

  • 5
  • Praise
  • Updated 3 weeks ago

FRStack has been updated to work with FlexRadio Systems next generation radios.

FRStack will work with your 1.X and 2.X based radios.

FRStack Version 2.1.30.4 Download Features:

Flex-6400/M Flex-6600/M support
SmartLink Support
Adds Mode Memory Tab
Adds CWX Window + Hotkeys
AGC Mode + Threshold
Diversity Menu + Hotkeys
RF Gain Menu + Hotkeys
RX TX ANT Menus + Hotkeys
PGXL Menu + Hotkey, Meters
Tune in FRStack sets PGXL to Standby
--serial=[radio sn] Command line support

Full release history can be found at http://www.mkcmsoftware.com/Flex/Index

Enjoy.

Photo of Mark - W3II

Mark - W3II

  • 122 Posts
  • 32 Reply Likes

Posted 5 months ago

  • 5
Photo of Tom

Tom

  • 93 Posts
  • 15 Reply Likes
A fine piece of software.  New version follows a new  version of SSDR.. Very stable and easy to use.
Thanks, Mark!

Tom, SP7WT
Photo of Larry: KE2YC

Larry: KE2YC

  • 65 Posts
  • 5 Reply Likes
Hi Mark
Thank you for the upgrade. Great job and thank you for all the work you do.

Larry ke2yc
Photo of WB9IXS

WB9IXS

  • 20 Posts
  • 1 Reply Like
What does this feature do:
Tune in FRStack sets PGXL to Standby
Thanks
JIm
Photo of WB9IXS

WB9IXS

  • 20 Posts
  • 1 Reply Like
Mark
You are amazing !! 
Lets be sure I understand. I can download the FRStack 2.1.30.5  install it into my 6500 and somewhere there will be a menu option to disable one of the RCA TX jacks only during tune ??

Yes I know I need to make a $200 donation and that is OK.

Thanks
JIm
WB9IXS
Photo of Larry - W8LLL

Larry - W8LLL

  • 374 Posts
  • 72 Reply Likes
Photo of Mark - W3II

Mark - W3II

  • 122 Posts
  • 31 Reply Likes



You can select 1 or more of the RCA TX settings. If the radio's RCA TX signal is enabled then FRStack's Tune menu or hotkey is selected, FRStack will disable the RCA TX signal then activate the radio's tune feature. When tune is deactivated FRStack re-enables the RCA TX signal. 

FRStack is installed on a PC on the same LAN with the Radio or on a remote PC using SmartLink.
(Edited)
Photo of Larry - W8LLL

Larry - W8LLL

  • 374 Posts
  • 72 Reply Likes
When I hit Tune from FRSTACK it activates TUNE and MOX and i don't get the tone that tune should send for tuning. Hitting MOX from FRSTACK just activates MOX like it should. Anyone else seeing this?
Photo of Larry - W8LLL

Larry - W8LLL

  • 374 Posts
  • 72 Reply Likes
My mistake its working fine.
Photo of W7NGA

W7NGA

  • 397 Posts
  • 156 Reply Likes
Awesome! Thank you Mark.

W7NGA dan
Seaside, Oregon
Photo of WB9IXS

WB9IXS

  • 20 Posts
  • 1 Reply Like
WOW.!!!
This is a dream come true.

Thank You so much.

Jim
WB9IXS
Photo of John - K3MA

John - K3MA

  • 248 Posts
  • 69 Reply Likes
For those with the Maestro and the new M models you should checkout the CWX and Profile selection capabilities of FRStacks.  You simply run FRStacks on a computer.  Connect it via Smartlink to the Flex.  Bring up the CWX window in FRStack and you have a complete CWX interface.  The same 12 CWX memories are available to be used as available on the full SmartSDR software.  You can send with hot keys or mouse clicks.  You can even change the speed right on the panel.  It is so much easier than using the six F buttons on the front of the Maestro or M model.  You can then save really useable fast menu options on these F buttons instead of CWX strings.

Regarding profile.  Take a look at the tab in FRStacks.  Changing a profile is a simple mouse click away.  Much faster than navigating thru the Maestro or M model interface.

And don't miss the hotkey functionality.  I use it to change the panadapter width on the Maestro display for SSB and CW use.  But there are so many more possibilities.
(Edited)
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1061 Posts
  • 214 Reply Likes
Mark

Excellent work!
Thanks for the effort.

Dave wo2x
Photo of Ali - 9K2WA

Ali - 9K2WA

  • 110 Posts
  • 23 Reply Likes
One of the best apps for the Flex,  I hope to see icons tool bars for quick access of most used items, we have now too many bells and whistles, hotkeys are  getting hard to remember.
(Edited)
Photo of EA4GLI - 8P9EH - Salvador

EA4GLI - 8P9EH - Salvador

  • 1730 Posts
  • 530 Reply Likes
Thanks for the RX TX ANT Menus + Hotkeys
It is very useful!
Photo of Simon Lambert

Simon Lambert

  • 9 Posts
  • 2 Reply Likes
Infomation.I working with Flex 6300 since a long time and I want try FRstack but he don't see my Flex..Do I forget a detail? All is well connect network unless . Maybe FRstack does not work with version 2 of Smartsdr?
(Edited)
Photo of Larry - W8LLL

Larry - W8LLL

  • 356 Posts
  • 69 Reply Likes
It works with version 2, get the latest version, should work without any initial settings. Make sure a firewall isn't blocking it.
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1011 Posts
  • 206 Reply Likes
FRAtack 2.1.30.4 is written to work wirh SmartSDR 2.1.30

Dave wo2x
Photo of Simon Lambert

Simon Lambert

  • 9 Posts
  • 2 Reply Likes
Thanks Guys!!And I will try it on other computer.....
(Edited)
Photo of Simon Lambert

Simon Lambert

  • 9 Posts
  • 2 Reply Likes
Finally!It's was my Firewall !!!! Thank's again...
Photo of Mark - W3II

Mark - W3II

  • 118 Posts
  • 31 Reply Likes
Windows network connections can be set to public, private or domain profiles. Currently FRStack's Setup creates a rule for your current profile. This means if you use a different connection profile FRStack may not work due to a firewall rule not being in place.
The next version FRStack's Setup will create rules for both Public and Private profiles.
Photo of N5LB - Lionel B

N5LB - Lionel B

  • 111 Posts
  • 18 Reply Likes
Maybe this is just MS but here is what just popped up from the following download page: http://mkcmsoftware.com/Flex/Index

Is this the correct download site?

I have never seen anything like this - maybe an error, or maybe not.  

Photo of Mark - W3II

Mark - W3II

  • 122 Posts
  • 32 Reply Likes
Yes this is the correct site.
This is a false positive. Make sure you are using the latest virus detection definitions. I am using threat definition version 1.261.747.0 dated 7:07:57AM 2/4/2018 and there are no issues detected.
Photo of N5LB - Lionel B

N5LB - Lionel B

  • 111 Posts
  • 18 Reply Likes
Ok, I will verify definitions file.   Quite a surprise when it showed up and I deleted the file.  

I am generally skeptical of MS virus detection.

On the other hand, better to be safe than extremely sorry. 
Photo of N5LB - Lionel B

N5LB - Lionel B

  • 111 Posts
  • 18 Reply Likes
My virus definitions were up to date: 1.261.747.0  2/4/2018.

I don't know what this means.

Then its a nothing.....I guess.   Done here. 
Photo of Bob G   W1GLV

Bob G W1GLV

  • 639 Posts
  • 107 Reply Likes
Nice job Mark, Love your software.
Photo of Rick - W5FCX

Rick - W5FCX

  • 175 Posts
  • 36 Reply Likes
Great job, Mark!  Love the FRSTACK software. It's exactly what I needed for 2-meter operation.

I have a few ideas to help improve the scanning, but other than that it's perfect.  Happy to take that discussion offline in a private conversation if you're interested in the feedback.

Rick
Photo of Mark - W3II

Mark - W3II

  • 122 Posts
  • 32 Reply Likes
I'm glad you like using FRStack, I am always open to new ideas and improvements. In FRStack, Help menu, select Contact Support to contact me directly. 73
Photo of W9KG

W9KG

  • 8 Posts
  • 0 Reply Likes
I recommend you (the developer) use something other than the FRS wave logo for your icon. The wave logo is trademarked and at some point, FRS will have to defend their trademark. 
(Edited)
Photo of Dan - VE3YXE

Dan - VE3YXE

  • 8 Posts
  • 0 Reply Likes
Very nice work! Now I need a bigger monitor... ;)