Ethernet API INFO

  • 1
  • Question
  • Updated 3 years ago
The Ethernet API WiKi given this example for INFO:
C16|info
R16|0|model="FLEX-6700",chassis_serial="K00000000",mbtrx_pcb="PC-0062",mbtrx_pcbrev="E",mbtrx_bom="B-0064",mbtrx_bomrev="A",mbtrx_serial="B28154-07 LF",mbpa_pcb="",mbpa_rev="",mbpa_bom="",mbpa_bomrev="",mbpa_serial="",name="",callsign="N5AC",gps="Warming Up",scu=2,slice=8,software_ver=0.0.3,mac=00:18:31:78:4F:B4,ip=192.168.30.136, netmask=255.255.255.0,gateway=192.168.30.1,location=""

However when I use the command I get this:
C09|info
R9|0|model="FLEX-6700",chassis_serial="1514-3143-6700-5667",name="KR4K-JC",callsign="KR4K",gps="Not Present",atu_present=1,num_scu=2,num_slice=8,num_tx=1,software_ver=1.4.16.63,mac=90:59:AF:56:6E:5C,ip=192.168.13.62,netmask=255.255.255.0,gateway=192.168.13.1,location="",region="ULCK",screensaver=model,options="None"

Why the big difference?

My radio
C08|version
R8|0|SmartSDR-MB=1.4.16.63#PSoC-MBTRX=1.3.1.0#PSoC-MBPA100=1.1.2.2#FPGA-MB=0.0.23.167



Photo of kr4k

kr4k

  • 74 Posts
  • 14 Reply Likes

Posted 3 years ago

  • 1
Photo of James Whiteway

James Whiteway

  • 905 Posts
  • 222 Reply Likes
The example from the API WIKI appears to be from a very early version of SSDR and the radio's firmware version. Also, your setup (network etc.) is different than what the person that posted the example was using at the time the sample was created. There is a lot of good examples here on this forum on using the Ethernet api and it's command structure.
james
WD5GWY
Photo of Eric - KE5DTO

Eric - KE5DTO, Official Rep

  • 718 Posts
  • 211 Reply Likes
The example was from an early version of the code and has since been changed.  The mb fields were dropped from info.  We added the "screensaver" (what shows on the LCD) and "options" (e.g. GPS, ATU, etc) fields.  A few of the others were renamed for clarity (num_slice vs slice).  If you need more info about any of these, just let us know.  Feel free to help improve the docs on these commands on the wiki.