CWX Macros

  • 1
  • Question
  • Updated 2 years ago
I bought a flex radio from someone else. This person had created macros in CWX. Have the software now installed on the PC here and the macros of this person are in my CWX. I have created other macros today and when I restart my software, these have been deleted and the old macros are returned from the other person. How can I fix this that I can start with a blank F1 to F12.

73 Pat ON3CQ
Photo of Patrick Moonen

Patrick Moonen

  • 33 Posts
  • 1 Reply Like

Posted 2 years ago

  • 1
Photo of Steve W6SDM

Steve W6SDM

  • 625 Posts
  • 283 Reply Likes

Click on CWX at the bottom of the screen, retype your values for F1 through F12, then save a new profile.  You may also want to look at the profiles that the previous owner created and either edit or delete them.
Photo of AH0U


  • 338 Posts
  • 50 Reply Likes
Here is what I do:
Click on CWX
Click on SETUP
Then enter text in whatever slot I want
Click on LIVE
To send I use whatever F key has the message I want
If there is data already in the slot you want, highlight it then over write using the method above
Photo of NX6D Dave

NX6D Dave

  • 308 Posts
  • 94 Reply Likes
Let me suggest that you reset the radio to "factory" settings.  This will clear all profiles and such that were created by the previous owner, and reset the radio to the out of the box factory condition.  Then start the process of building up a set of profiles, CWX macros, memories, transverter settings, USB cable settings, etc., from scratch.  I think you'll spend less time and get cleaner results.
Photo of Patrick Moonen

Patrick Moonen

  • 33 Posts
  • 1 Reply Like
Hi Steve and Bruce thanks for the help everything works now.

73 Pat