6700 AM Sensitivity below 1.6MHz @ 3KHz BW

  • 1
  • Question
  • Updated 5 years ago
  • Answered
I am looking to purchase the 6700. I currently use a WinRadio G313 for BCB DXing. I'd like to replace it when I get the flex. What is the Flex 6700 AM sensitivity in the freq range below 1.6 MHz @ 3KHz BW? Thanx! Jim Shaw, AL7BA
Photo of Jim Shaw/AL7BA

Jim Shaw/AL7BA

  • 30 Posts
  • 0 Reply Likes

Posted 5 years ago

  • 1
Photo of Gerald - K5SDR

Gerald - K5SDR, Official Rep

  • 738 Posts
  • 1358 Reply Likes
Official Response
The FLEX-6000 series has the same sensitivity on MW as it does on the higher bands. With the preamp off, this is a -122 dBm MDS in 500 Hz. You can do the math to convert that to other bandwidths. You can also use the 20 dB preamp on MW if you have a low gain antenna. I have not measured the preamp on MW, but it will probably reducte the noise figure down there by as much as 15 db. With something like a Pixel loop, you will get great MW reception without the preamp.