60 meters lost with 2.0.17 upgrade.

when trying to tune my antenna to channel 1 of 60 meters, The ATU refuses to do so. Even the Tune button does nothing. This used to work on 1.10.16 software. 1.11.12 also fails. What happened?

Phill Beistel

30 Posts
4 Reply Likes
sad

Posted 2 years ago

2 years ago

Phill Beistel

30 Posts
4 Reply Likes

I also upgraded to 2.0.19 with the same result. Seems to have happened between 1.10.16 and the 2.0.17 release.

Comment

2 years ago

Chris DL5NAM

666 Posts
151 Reply Likes

Check QRG and TX bandwidth

Comment

2 years ago

David

301 Posts
49 Reply Likes

If 5.330.5 is used the tune button is available but as Phill stated it does nothing. If 5.330.55-5.330.7 It will tune and TX.

Comment

2 years ago

Jim Gilliam

921 Posts
215 Reply Likes

Wonder if there is a Beta check list?

Comment

2 years ago

Tim - W4TME, Customer Experience Manager

9186 Posts
3539 Reply Likes

Official Response

In SSB and DIGx modes, TUNE is done on the carrier frequency to prevent QRM in the receive passband. On 60m, this is a special case because you are at the edge of a channel and emission is not allowed at the carrier frequency because some of the RF energy is outside of the channel designation. You need to tune to a frequency inside the channel bandwidth to use the TUNE feature as indicated by David above.