Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.18 | SmartSDR v4.2.18 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

SWR faults on 6 meters even with good dummy load connected

K2BLA
K2BLA Member ✭✭
in Aurora

I was going to work MS on six and hit the tune button to check that my SWR was OK. I always do this before transmitting. I got an SWR fault. I connected a good dummy load and still get the SWR fault. On the antenna it receives OK. Any ideas what would cause that?

Comments

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    Once you have confirmed that it isn't a problem with the jumper cables, and you hve reset the radio, open a support ticket so we can look into it.

  • K2BLA
    K2BLA Member ✭✭

    Mike,

    I have added comments to Tim on an already opened support ticket involving the full scale values for the power meter which could be connect to the problem.

    Is there a procedure for resetting the radio without losing all my current settings? The instructions discourage resetting the Aurora to factory default.

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    No. That is why we call it a reset. :)

    But, you can backup (export) your profiles.

    I discussed this with Tim and resetting the Aurora is not an issue.

    But, I would like to track down what you saw about resetting so I can look into it.

  • K2BLA
    K2BLA Member ✭✭

    I am using SmartSDR Software User Guide Rev 4.1.5 March 26

    Section 40 says: "This should only be used as a last resort. If you are having trouble with your radio, please submit a HelpDesk support request."

    Factory resetting is mentioned several times in the document.

  • K2BLA
    K2BLA Member ✭✭

    Good news. The xmt antenna was changed to ANT1 but my ANT2 is for 6m. I did not change that. I was on six yesterday and everything was OK. I made no changes before I shut down and this morning I didn't think to see if the antenna was changed but it was. I switched the xmt antenna to ANT2 and no SWR faults.

    Everything seems to work OK now on six.

    Changing the 6m antenna hasn't resolved the problem with the power meter full scale.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories