Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

New here, new to me Flex signature edition 6500

N1GMM
N1GMM Member ✭
in FLEX-6000 Signature Series
Hi All,
New Here, N1GMM. But not new to Ham Radio.
I have made mostly my own Home Brew things (still do) but this PC based system is new to me. Booted up. It imediately upgraded to HW 4.1.5.39794 and 4.1.5 sdr software. Receiving fine All Band. I am not new to SDR either, but mostly linux before.
Just here to say hello and ask if there is anything I should do before hand before actually starting to use this? I am a technical guy, electronics,semiconductor, and software background, although it has been a few years. I am 70. I am CW only as the 2 strokes (right cerebral) 4 years ago still slow me way down.. and my voice and hearing are shot.. without headphones and an equalizer I have to assist. CW is fine to hear.. but I am regaining my CW back.. dang strokes.

I look forward to talking with you folks. I am more used to Unix/Linux but get along ok in Windows 11.. running a Thinkpad X1/Gen11, 13th Gen core i7-1365u, 1800mhz, 10 cores.. 32 g of memory. Should be plenty for this..

vry 73
Guy N1GMM

Comments

  • VE7ATJ_Don
    VE7ATJ_Don Member ✭✭✭✭

    Well, at the risk of offending the '…manual, why do I need a manual?' in some of us, a great place to start is to download and read the SmartSDR manual available from the documentation portion of the flex website. Yep, it's long, but it has a LOT of good information on how things work and will make your journey with the radio much more productive. Also, there are a number of 'how to' articles published by the Help Desk located here:

    "How To" Articles – FlexRadio

    These are great with some of the more esoteric parts of running your new Flex.

    Welcome to the family!

  • N1GMM
    N1GMM Member ✭
    Don, No Offence, The manual is always the first place I start.
    Thanks for the link.. and the welcome.
    vry 73
    Guy
  • John KB4DU
    John KB4DU Member ✭✭✭✭

    And, kinda like getting a new phone, just play with it, can't hurt it. Pretty much a 100W transmitter is a 100 watt transmitter is a …. The receiver takes the most accommodation, so hook up an antenna and poke around. But I agree the manual is a valuable resource. Probably the best written ham equipment manual i have ever used. Very procedural, not just a reference document.

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    You may want to start at our new user playlist too.

    https://www.youtube.com/watch?v=YJteC7p59ZU&list=PLcubIF34IGQsV_G1p1JiCNhEzxwlsKHRN
  • N1GMM
    N1GMM Member ✭
    Hi All thank you. I am noticing that it upgraded to 4.1.5 and I am licensed according to the radio menu at V1. It is looking like I need to upgrade the software ($200) right? Seems like a lot, but perhaps I need this. There is so much documentation.. there must be a software users guide (not just changes Guide) that can be seen. Hihi.. Must be me..

    guy
  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    You should be able to go to V4.1.15 for free. If you can't please open a support ticket. That radio version is really old, so it might take a bit.

    And, be glad for the documentation. It is all excellent. You don't have to read it all at once to get on the air.

  • John KB4DU
    John KB4DU Member ✭✭✭✭

    Sounds like you are saying it has latest version installed, but with V1 privileges. If so, there is fee for later privileges.

  • VE7ATJ_Don
    VE7ATJ_Don Member ✭✭✭✭

    @Mike-VA3MW — is there a cheat sheet somewhere showing the differences/features in each of the major versions (i.e. 2.x v 3.x v 4.x)? I can't remember them off the top of my head or I'd list them here for Guy. It would be helpful for those who acquire an 'old' :-) radio….

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    Don, no there isn't. But, if someone wants to grab all the readme notes and drop them in ChatGPT, it will summarize it for you.

  • John KB4DU
    John KB4DU Member ✭✭✭✭

    Basics (from memory) V3 versions are the same as the corresponding V2 versions, but V3 contains the Multiflex feature so multiple computers can connect to one radio. V4 brings these two under one roof (4.whatever) with a few new “features “.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories