It's time for Flexradio to port the SmartSDR app to Linux. NOW!!

jamesdenglish · December 2025

There was an error rendering this rich post.

Lionel · December 2025

I use Linux on my notebook but given the issues I fight with Microsoft, Linux seems like an entire new set of problems. A wild guess is that porting SSDR to Linux isn’t trivial.

David Decoons, wo2x · December 2025

It is not trivial having many different flavors of Linux. Same with Android. Probably why you haven’t seen anything yet as support would be a chore for the developer.

A few people have been working on a Linux version. Flex Developer’s Program is designed to give developers the support they need to write client software and apps for the radio. SmartSDR for IOS and MAC were written and supported by Marcus, DL8MRE.

KD0RC · December 2025

Simon, NV0E has a working version for Linux right now. It is not ready for release yet, but it is getting close.

John KB4DU · December 2025

James, you are welcome to do that.

Didier F6DXE · January 11

I am more interested in a Linux version of the CAT and DAX controls than the full version of SmartSDR as I use my Flex6400M from home and barely in remote.
I need to be able to link different software like Qlog or WSJT-X to the radio without having to go through the terminal commands with SOCAT

73
Didier(****) F6DXE

Mike-VA3MW · January 13

Sadly, porting is not easy and usually not very successful. And, FRS, at this time, does not have a Linux version project on the planning books as there is so many other things pressing.

However, there are others working on a Linux Client. Search in the community for the details.

KD0RC · January 13

Hi Didier, check out nDAX and nCAT.

https://www.bing.com/ck/a?!&&p=b07f7b8a967ba2ca60df022022b2c5b04b1d695146c17f9716ab082454f9eb8cJmltdHM9MTc2ODE3NjAwMA&ptn=3&ver=2&hsh=4&fclid=20199076-1675-6409-02e4-821c178d65c5&psq=ndax+ncat&u=a1aHR0cHM6Ly9naXRodWIuY29tL2tjMmctZmxleC10b29scy9uREFY

https://www.bing.com/ck/a?!&&p=31da1cf3c307a7694a866aa484b6e4e5e1751e95e7f83787ee3a78e1d6105023JmltdHM9MTc2ODE3NjAwMA&ptn=3&ver=2&hsh=4&fclid=20199076-1675-6409-02e4-821c178d65c5&psq=ncat+for+flexradio&u=a1aHR0cHM6Ly9naXRodWIuY29tL2tjMmctZmxleC10b29scy9uY2F0

Didier F6DXE · January 14

Thanks Len , I came accross nCAT and nDAX an hour ago from an article of Ellen Hardin AI7FP
Got it running now with QLog and Wsjt-x

Didier

Didier F6DXE · February 12

Running QLolg WSJT-X, JTDX, QSSTV with my Flex6400M on Linux Mint.
Using HamLib and nCAT/nDAX.
UDP is working well between the chosen Mode and and the log.

It's time for Flexradio to port the SmartSDR app to Linux. NOW!!

Declined · Last Updated January 13

Comments

Leave a Comment

Categories