Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?


SmartSDR v4.0.1 and the SmartSDR v4.0.1 Release Notes

SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

FTDX 101 MP to TGXL cannot communicate?

W2PP
W2PP Member ✭✭✭
in Tuner Genius XL

I have tried a null modem cable and straight cable. I cannot get the TGXL to hear the radio.

What am I over looking? Baud same set up on both ends.

Peter

Answers

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    Peter, I would send and email to 4O3A and ask them for the correct configuration.

    73

  • aggroz
    aggroz Member, Unconfirmed ✭
    Has anyone come up with a solution to connect the FTDX-101 to the Tuner Genius? I am having all sorts of issues. I have emailed 4O3A and I am awaiting a response.

    Thanks
    Adam
    N8MOX
  • David Decoons, wo2x
    David Decoons, wo2x Member, Super Elmer Moderator

    hi Adam

    Contact me at my QRZ address. I wrote a white paper for interfacing the FTdx101D to the Genius Trio (PG XL, TG XL, AG).

    You can use it for connection of TG.

    Straight through RS 232 cable from Yaesu to CAT port of TG. Set Yaesu RS232c baud to 9600, 8,n1. Set RTS off.
    in TG CAT tab, enable CAT and set to Yaesu 2 9600 8,n1.

    The TG should show frequency of VFO A.

    RCA cable from TX REQ on Taesu to PTT in on TG.

    PTT Out of TG to amp.

    73 Dave wo2x

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories