Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Flex 8600 3,9.19.37287 dead rx and tx after long tune

Lars Pettersson
Lars Pettersson Member ✭✭
in FLEX-8000 Signature Series

I have noticed that after a long tune using HF AT auto tuner it needs some time to find match

when done the radio are quite no tx or rx i have to restart the flex its frustraitng

ok its a beta but!!!!!!!

Comments

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    This is a bit confusing as it is hard to tell what is going on.

    What happens if you do not have the tuner in line?

  • Lars Pettersson
    Lars Pettersson Member ✭✭
    edited August 26

    Now it has happend 2 times today talked to a friend on 60m and when i stop TX the reciver is dead tx work

    trying to close slice and start again DOES NOT HELP no squelch or NR activated

    No Tuner in line Radio needs to reboot there was also a 5 sec glitch no signal then it got back

    Panadapetr on maestro waterfall is still but vfo moves its very frustrating.

    1 time yeasterday on 40m not a single beep on spectrum its stone dead

    Thinking about rollback to prev version.

    ****

  • Lars Pettersson
    Lars Pettersson Member ✭✭
    edited August 28

    Update!!!!!

    started radio lunch time only rx signals ok. Left my home 14Z and just got home20Z Noticed that Reciver is DEAD nobody at home to touch the radio………………..The transmiter works

    To get it working again i have to rebote the **** radio

    I mean what THE HECK is going on???????????????????

  • Trucker
    Trucker Member ✭✭✭✭

    Help Desk ticket time.

  • Lars Pettersson
    Lars Pettersson Member ✭✭
    edited September 5

    Did that.

    Did downgrade to 3.8.23 and left radio on whole night still working lets see if its a sw problem

    Tim did not like that but if the radio works ok with this version they have to check.sw

    The problem started with 3.9.19

    I keep fingers crossed it will work fort some time nw

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited September 5

    If you downgraded, make sure you did a radio factory reset as well as that is part of the process. Not doing a factory reset will result in some internal database issues.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories