Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

SmartSDR - Ability to save the antenna selection with the frequency

W4AFK Bruno
W4AFK Bruno Member ✭✭
in New Ideas

The 6x00 and 8x00 radio have two antenna ports. It would be nice if SmartSDR was able to save the TX and RX antenna ports for each frequency.

That would make it easier for those like me who have two HF antennas

3
Up Down
3 votes

Active · Last Updated

Comments

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    Bruno, have a look at the SmartSDR manual and the use of Profiles. We agree, it isn’t the most straight forward, but it is what we have at the moment.

    image.png

    This is how they tie together

    image.png
  • VE7ATJ_Don
    VE7ATJ_Don Member ✭✭✭✭

    Hi Bruno… just following on from Mike's suggestion. I use Global Profiles to do just what you are wanting (I think). I have two HF antennae — a vertical and an EFHW. I set up Global Profiles for each band, mode and antenna. E.g. 20m CW EFHW, 20m CW Vertical, 15m Phone Vertical, 15m Phone EFHW, etc.

    The neat thing about using the Global Profiles is that you can also set AGC-T, gain, etc. for each mode/antenna as well so when you load the profile everything is automagically all set!

  • W4AFK Bruno
    W4AFK Bruno Member ✭✭

    Thanks Don and Mike - I watched a few YouTube vidoes and read more about the profiles. I agree with Mike that's it's not the most elegant way, but it works.

    Note that my posting was a suggestion for future improvements in the "New Ideas" section :-)

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories