Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

6500 Startup: Calibration, Timeout, LED Flashes three times rapidly

BOB KLIMAN KB6CIO
BOB KLIMAN KB6CIO Member ✭
in FLEX-6000 Signature Series
Found some old reports to remove power. Removed power. Applied power and I am not operational.
SHOULD I DO ANYTHING MORE ?
===
Radio SN: 2117-5332-6500-1279
Region USA
HW Version: v3.8.23.35640
Model FLEX-6500
Nickname A161753320019
Using SmartSDR v3.8.23 on Windows 11
Tagged:

Comments

  • KD0RC
    KD0RC Member, Super Elmer Moderator

    Hi Bob, I would submit a help desk ticket.

  • BOB KLIMAN KB6CIO
    BOB KLIMAN KB6CIO Member ✭
    Hi Len KD0RC - THANK YOU for your comment. I have submitted a Help Desk Ticket. 73, Bob
  • VE7ATJ_Don
    VE7ATJ_Don Member ✭✭✭✭

    If the 3 flashes are red, this likely identifies a 'boot failure' which may be a failing SD card.

    Fortunately, Flex Help Desk is really good at diagnosing, sending out a new card and installation is a snap.

  • BOB KLIMAN KB6CIO
    BOB KLIMAN KB6CIO Member ✭
    Case Closed. I submitted a Help Desk ticket. I got a prompt response and followed the procedure carefully including wait times. I am now 100% operational after making a few QSO's, shutting down, and restarting. Subsequently did some more contacts with success.
  • KD0RC
    KD0RC Member, Super Elmer Moderator

    I'm glad to hear that you got it going again Bob!

  • Val DM1TX
    Val DM1TX Member ✭✭

    I want ot comment but Len was faster. I had same issue and was easy solved by replacing the card with a new one. Still love my 6500 :-)

    73

    DM1TX

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories