Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

No audio output from Flex 6300

Doug
Doug Member ✭✭
in FLEX-6000 Signature Series
My 6300 has been neglected for about a year. Today I rewired everything to get the 6300 back on the air. I installed the latest SmartSDR which did an update on the 6300. I plugged in a powered soundbar to the rear audio jack. I had tested the soundbar with a satisfactory buzz when I held the plug in my fingers. However, no audio came out. Clicking PC Audio off and on got click into the soundbar. But no audio. I tried to get audio through the attached PC - nothing. I plgged in a set of headphones - no audio. The 6300 has just sat idle for a year. I hope I'm doing something wrong. Otherwise, the alternative is the 6300 hs become junk. ANY help appreciated. (Sadly, I've gotten old and brain isn't what it used to be. So a mistake is certainly possible).

Answers

  • Trucker
    Trucker Member ✭✭✭✭

    Does the sound bar have a stereo connector on it? If it is a mono connector it could be causing a problem. Otherwise, it is likely to be a slider not turned up enough in SmartSDR. There are three different sliders that can effect the audio output. In the upper right corner of SmartSDR is a master volume slider ,then one in the Slice receiver flag. And another on the right above the AGC-T slider. ( which can also effect volume if it is set all the way to the left. ) .

    James

    WD5GWY

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    Can you post a screenshot of SmartSDR please.

  • Doug
    Doug Member ✭✭
    I have realized my mistake. I had forgotten that each slice has its own volume control. Thanks for reminding me James. Amazing how much you can forget in a year. tnx & 73
  • Trucker
    Trucker Member ✭✭✭✭

    Don't feel bad. I regularly forget things and just know my radio has messed up. Instead it is almost always pilot error!

    James

    WD5GWY

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories