Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

SO2R RTTY DAX ONLY STREAMS A MAESTRO TO 6600M

David
David Member ✭✭
in DAX

Wondering if it is me or the way the Maestro is configured? Anyway I have two instances of MTTY running but audio only streams to A. An error message appears for slice B, yellow light, no streaming. DAX is depressed for both slice/VFO A&B, split display, seems to be correctly configured. I do not use any other non-FLEX programs other than N1MM, like STREAM DECK, STREAM BUTTONS, STREAM THIS, STREAM THAT (just making those up). Can anyone help with what I am missing or the order in which I am setting up the radio. Thanks.

Comments

  • Rich M5RIC
    Rich M5RIC Member ✭✭✭
    edited January 2025

    Do you have a DAX rx channel set-up for slice B?

    Each slice has needs a DAX rx channel, on slice B click on the DAX drop down and make sure that you assign a channel - usually channel 2 if you have slice A assigned to channel 1.

    image.png

    The DAX button you press to turn on or off is for DAX TX, not RX.

    73

    Rich

  • David
    David Member ✭✭

    Thank you. I use the Maestro. Your reply seems to show an SDR software solution. How is this changed or integrated for Maestro use???

  • Rich M5RIC
    Rich M5RIC Member ✭✭✭
    edited January 2025

    It's the same, on the Maestro you should have the DAX menu still on each slice? Press on the frequency so you see the menu then change the DAX number.

    Below here it says 1 for Slice A, on Slice B make sure this is on 2 etc.

    image.png
  • David
    David Member ✭✭

    In other words, using a MAESTRO, how does one "assign" a DAX channel to a RX slice, ie "B"????

  • Rich M5RIC
    Rich M5RIC Member ✭✭✭

    Use your finger to press on the frequency on slice B and the screen you see above will show, where it says DAX press on that and then choose 2.

  • David
    David Member ✭✭

    Thank you!! I have it and all working properly!!

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories