Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Rig Expert 600 PS question

K1UO Larry
K1UO Larry Member ✭✭✭
in Peripherals & Station Integration

I thought , probably mistaken, that a Rig Expert would auto recover back to the on position after a loss of commercial AC power and the Home generator kicked in. Well… I must have missed a setting in the firmware to help that happen? I only changed the output voltage to 14.4V before installing in the remote shed. The PS can be set to auto recover correct?

Comments

  • David Decoons, wo2x
    David Decoons, wo2x Member, Super Elmer Moderator

    Hi Larry.


    Yes. Go to Settings then 600 Srttings. Second line down, Restore Outputs on Mains Return.

    73

    Dave wo2x

  • K1UO Larry
    K1UO Larry Member ✭✭✭

    Thanks Dave , I missed that in the rush to get it installed and set the vltg a bit higher I guess! Nice power supply and a great feature to have in a remote location.

    73

    Larry k1uo

  • David Decoons, wo2x
    David Decoons, wo2x Member, Super Elmer Moderator

    yes. Mine is connected via USB to a smal Lenovo ThinkCenter i5 PC in the cabinet. I can Remote Desktop in and check PSU.

    I also have the LP700 with four sensors in the cabinet connected to the ThinkCenter. I use a program called Virtual Here to extend the USB to my shack desktop where I cal run the LP700 app.

    73 Dave wo2x

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories