Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?


SmartSDR v4.0.1 and the SmartSDR v4.0.1 Release Notes

SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

6400M Connection to Acom 1000 valve Amplifier (newer model)

Keith Pawley
Keith Pawley Member ✭✭
edited October 2024 in Peripherals & Station Integration

Hi Everyone,

Could someone please tell me what cable is required to connect my Acom 1000 valve amplifier to my 6400M.

It is the newer model amplifier with the bevelled frontage.

Thanks in advance

Keith Pawley

M0PAW

Comments

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    All you should require is an RCA cable from TX1 to the PTT in on the A1000. This is the cable that puts the amplifer into TX.

    Follow the instructions in the A1000 manual. This video should help you through the rest.

    ALC is not required and is actually not used any more.

    Using ALC can sometimes introduce intermodulation distortion (IMD) into the transmitted signal. This happens because the ALC might fluctuate the output power in a way that affects the signal purity, leading to a less clean signal.

    73

    https://www.youtube.com/live/3_bSfOxi1sI?si=vmyGZ68_Sxptv0c7

    .

  • Keith Pawley
    Keith Pawley Member ✭✭

    Thank you for your time Mike.

    M0PAW

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories