Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Looking to power SteppIR SDA 100 on with my 6600

Rick N0VT
Rick N0VT Member ✭✭✭
edited August 2024 in Peripherals & Station Integration

Let me confess right off the bat that I know NOTHING about this sort of thing so if you know how this can be done, please use small words…

I have a SteppIR SDA 100 controller. When I'm remote I can use PST RotatorAZ to retract the elements, but I would like a way to power the controller on and off. (PST has an on/off control but it's non-functioning) I have read elsewhere that a relay can be used to simulate pressing the power button. The button is a momentary contact type-press to turn on/press to turn off

I just happen to have this 4 channel USB control switch lying around:

https://www.amazon.com/NOYITO-4-Channel-Module-Control-Intelligent/dp/B09RGVQXXT/ref%3Dsr_1_5

It seems like there should be a way to use it to make this happen, but like I said I'm completely ignorant about how to make it work.

73, Rick N0VT

Comments

  • Alan
    Alan Member ✭✭✭✭

    Rick

    Just so you know, the SDA-100 applies a "holding" current, when not in motion. SteppIR advised if you power down the controller, your antenna elements may drift.

    There are various opinions on the likelihood of drift.

    Easiest way to remove power, remotely, is any of the common home control AC plug, for your favorite operating system.

    Alan. WQ9WUD

  • Rick N0VT
    Rick N0VT Member ✭✭✭
    edited August 2024

    Thanks Alan. I was ASSUMING that due to the nature of the push button power switch that it wouldn't come back up on its own after powering down. A quick test proved me wrong, power cycling the 33v power supply as you suggested works fine. Unfortunately there isn't an emoji for smacking one's self in the head.

    73, Rick

  • Geoff AB6BT
    Geoff AB6BT Member ✭✭✭
    image.png

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories