Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Flex 6400M Recording and Playback

I'm trying to record my callsign for transmission (CW) over the air, following the instructions for recording and playback. I read the manual several times -- press the red button, transmit, press the red button again, then press the button that is now green; but nothing happens on playback. I think I'm missing something obvious. Your help would be greatly appreciated!

73, Joe, WA2PJI

Best Answers

  • Member ✭✭
    Answer ✓

    Answered my own question: One of the options that can be used with the Function Keys is to "Send CW," where a short message can be transmitted, such as a CQ. The red and green dots on the Slice Menu were not designed for this purpose, as I have discovered. In any case, this information may be of help to others.

  • Member ✭✭✭✭
    Answer ✓

    When sending CW, no audio is sent, only carrier. So nothing to record.

Answers

  • Member ✭✭

    Thanks for the explanation, John! Now the record/playback option makes much more sense. I just wish that I had looked more carefully at the manual (Section 34.4) about the function keys, before sending my earlier question to the group. 73, Joe

Leave a Comment