Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

MARS/CAP

Mike KB0FX
Mike KB0FX Member
edited February 2020 in FLEX-6000 Signature Series
Can the MARS/CAP option be installed in the field?

Answers

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited February 2020
    Yes.  
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited February 2020
    I believe this question needs more than a single word answer ;-)

    If you have a FLEX-6700 or FLEX-6500, the only thing that is needed is a TURF file which you can get from opening a HelPDesk ticket and providing a copy of a valid MARS license and the serial number of your radio.

    If you have a FLEX-6400(M) or FLEX-6600(M), then you need the TURF file as noted above in addition, you must have an extended transmit module installed in the radio.  This can be field installed or it can be installed by the service department if you already have the radio or installed at the time of purchase.  However, if you have the service department install the module, they will perform a complete test and calibration of the radio with the module installed to ensure it is working correctly.

    If you have  FLEX-6300, this radio is not capable of being used for MARS.
  • RickBunn
    RickBunn Member, Unconfirmed ✭
    I am a CAP communicator and the Flex is not listed on compliant radios. Is the Flex 6600M approved?
  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    Who does the approving?

    And, if we are not on the list, what do we need to do to get on it?

    (have them email us at info@flexradio.com and we will work with them)

    BTW, we sell a LOT of radios for MARS / CAP operators.

    73

  • WX7Y
    WX7Y Member ✭✭✭✭

    Yes they work fine, There are MARS members whom have built custom Profiles for both Voice and Digital at the same time using 2 slices, Very Slick setup.

  • John KB4DU
    John KB4DU Member ✭✭✭✭

    For CAP operations the radio has to be compliant with federal NTIA (Redbook) standards for frequency stability and bandwidth. However, the standards also require that the radio have fixed (not user accessible) programming for frequency (channelized) and all other performance parameters.

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    Hi John

    If that is the case, then no amateur radio has locked down fixed channels and your only choice is commercial HF radio equipment.

    All Amateur HF radio equipment is VFO tunable with memory channels.

    73

  • Rick N0VT
    Rick N0VT Member ✭✭✭
    edited January 2024
    https://community.flexradio.com/discussion/comment/20608309#Comment_20608309

    If you have a Stream Deck, you can set up a multi-action switch to toggle the slice mode between USB to DIGU. This way you can do everything on one slice.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories