Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Sidetone from Morsekeyer6K when on LAN ?

Options
Andrew O'Brien
Andrew O'Brien Member ✭✭✭
in Third-Party Software

I am not getting a CW sidetone using Morsekeyer6K via LAN access to the 6400 . Is it not possible unless connected directly to the rig ?


Andy K3UK

Answers

  • KD0RC
    KD0RC Member, Super Elmer Moderator
    Options

    Hi Andy, the short answer is no sidetone unless keying the rig from the key line or acc jack pin 4.

    The reason is that any keying over LAN or WAN has enough latency as to make sending impossible (even on a very fast network).

    The solution is to get the sidetone from the keyer, Morsekeyer 6K in this case.

    If you can plug the keyer directly into the back of the radio, you will be able to use the radio's sidetone.

  • Andrew O'Brien
    Andrew O'Brien Member ✭✭✭
    Options

    Thanks. I had a brain lapse and forgot that when I previously used it, I had the rig directly connected.

    Andy K3UK

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories