Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

FT8 setup for Flex 6400

SmartSDR settings for CAT PTT do not work for me. I've tried several variations of settings without success.

Screen grabs provided below illustrate where my settings are for CAT and WSJT.

Do the Device Manager Virtual Port settings matter when setting COM ports on the WSJT Radio tab?

I would most appreciate guidance and tips for CAT and PTT operation.  

Thanks, Ron


Comments

  • David Decoons, wo2x
    David Decoons, wo2x Member, Super Elmer Moderator

    As Larry pointed out, you need the colon between the IP address 127.0.0.1 and the TCP port number 5004.

    Dave wo2x

  • Ron Miles
    Ron Miles Member ✭✭

    That made a big difference, a colon instead of a period. CAT and PTT operation solved!

    Thanks for quick response.

    Ron

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.