Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

using flex 1500 as a receiver with a DX-60

Kevin
Kevin Member ✭
in FLEX Series (Legacy) Radios
I enjoy my flex 1500 very much but I would like a little more power at time an I have a Heathkit dx-60 that is a good transmitter and would like to have the great receive of the 1500 your help would be greatly appreciated Than you

Best Answer

  • Trucker
    Trucker Member ✭✭✭✭
    edited June 2022 Answer ✓

    It might be easier if you found an amplifier like the Hardrock 50. 3 to 4 watts out of the 1500 will drive the Hardrock 50 to 50 or 60 watts. Modifying the DX-60 would require a lot of work. Plus, you would need to retune the finals if you change frequency very much.

    And finally, the DX-60 does not cover 60,30,17 or 12 meters. Personally, I think it would be cheaper to buy or build a solid state amplifier.

    James

    WD5GWY

Answers

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories