Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.18 | SmartSDR v4.2.18 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

My Sidetone Disappeared Flex 6300

Steve W6SDM
Steve W6SDM Member ✭✭✭
in SmartSDR for Windows

I didn't make any changes to the rig or software. I was working fine in CW. When I left the rig for a while and came back, my sidetone was gone. The rig audio is fine.

I use a pair of Bose power speakers for both rig and computer audio with both audio cables going into the speakers. The rig audio is coming from the speaker port on the back of the righ. Sidetone button is lit, Volume 55, Pitch 580, Breakin is lit. The mode is set to CW.

I can transmit, and if I use CWX I get a sidetone as usual. I have swapped the audio cables coming from the computer and rig and the problem persists. I have rebooted the whole system and it didn't correct anything.

I'm using a Windows 10 PC with SmartSDR 2.7.6.

Any help would be very much appreciated.

73,

Steve, W6SDM

Best Answers

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    Answer ✓

    support ticket created.

  • Steve W6SDM
    Steve W6SDM Member ✭✭✭
    Answer ✓

    Thanks, Mike.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories