Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Power Amperage Drawn at Bootup on FLEX-6400

The 6400 specifications state that its power draw is 1.7A Receive Typ., 23A Transmit Max. What is the typical amperage drawn by the 6400 at bootup?

Thanks,
Mark
AC3EW

Best Answers

  • VE7ATJ_Don
    VE7ATJ_Don Member ✭✭✭
    Answer ✓

    I suspect it would be fairly low -- probably close to the 1.7A or less on receive. There's no big need for a power 'surge' on bootup like in the old tube rigs...

  • k3Tim
    k3Tim Member ✭✭✭
    Answer ✓

    Testing a 6500, the "off" current was 170mA and maximum current during boot was 1.33A as measured by a Powerwerx Watt Meter // Power Analyzer.

    _..--

    TiM

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.