Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

6600M - Three red flashes of software death

Ted VE3TRQ
Ted VE3TRQ Member ✭✭✭
in FLEX-6000 Signature Series

Well, it happened to me too :-(

Occasionally over the last few months the radio would reboot itself. No biggy, it's software, right? Well, this time the radio came up with three lovely red flashes of the power switch. Cold boot - no change. Factory reset - no change. Powered off before each reboot of course.

Trouble ticket submitted - hope the holiday period doesn't hold things up too much. Guess it's time for a new SD card - it did run for a long time on the older v2.4, so may well have had incipient corruption.

Good thing I still have a nice functional K3 with a P3. I'll miss the 6600M screen, WNB on 80m, and using xDax / xCat on my Mac away from the shack - it's back to Linux in the shack for now (no hardship :-)

Comments

  • Bruce W6SFG
    Bruce W6SFG Member ✭✭
    You might try this.
    Unplug the Red/Black power connector from your radio for 5 minutes.
    Next Plug it back in and wait 5 minutes.
    This time when you power the radio on, hold the power switch until it begins flashing white.
    Release the power button and wait about another 3-5 minutes, until you get a sign in screen that says choose operating system or just operate.
    If that does not solve the problem then most likely you will need a new SD card.
    Good luck!
  • Ted VE3TRQ
    Ted VE3TRQ Member ✭✭✭

    Did all that - new SD card on the way.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories